G-code plans for a cnc router

Results 1 to 2 of 2

Thread: G-code plans for a cnc router

  1. #1
    Registered
    Join Date
    Jan 2015
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default G-code plans for a cnc router

    Hello Everyone,
    If you want to build a rocking horse you go on line and purchase the plans trace them out and cut them on your bandsaw, drill them in your drill press, sand them with your sander and put it together.
    My question is can you purchase plan with G-code for a CNC Router for example a hope chest, cabinet doors, clocks, etc?
    Thank you,
    Philip

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: G-code plans for a cnc router

    You may be able to find some, but it's not common.
    The reason is that not all g-code is universal, and ideally, it should be tailored to your specific machine.
    Some controls may not support certain g-codes, and feedrates will tend to be different from machine to machine.
    Personally, I would never run g-code on my machine that was created by someone else.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G-code plans for a cnc router

G-code plans for a cnc router