wincnc ini files and support (camaster, shop sabre, warthog)

[cabnet636]

here is an ini file from the wincnc controller off of the latest version

we need to teach each other how to oprerate this software as while it is great most of the providers do not have a clue what we use it for

[Demo Mode]
demomode=1

[Timer Card Settings]
timertype=7200

[Pulse Outputs]
steppulse=p5d5
maxstepv=50000

[Smoothing]
g09=s30

[Table Size for Viewer]
table=x0 y0 w48 h96 b1

[Laser]
laser=t1 p100 d95 m1

[Tool Changer]
atc1=a2

[Spindle Speed]
da=t1 v10
spindle=t1 r18000

[Axis Settings]
axischar=XYZW

[Velocity Groups]
vgroup=fxy
vgroup=xy
vgroup=z
vgroup=w

[X Axis]
axisspec=p0 s1 d1 r500 o1 e1 a1000
axisvel=r1800 f800 s50 m400 h1800 c10

[Y Axis]
axisspec=p0 s0 d0 r500 o1 e1 a1000
axisvel=r1800 f800 s50 m400 h1800 c10
axislo=p3 b5

[Z Axis]
axisspec=p0 s2 d2 r100 o1 e1 a500
axisvel=r100 f50 s5 m20 h100

[W Axis]
axisspec=p0 s3 d3 r100 o1 e1 a500
axisvel=r100 f50 s5 m20 h100

[Arc Settings]
g2modal=1
arc_err=.01

[Soft Limits]
lolim=x-1 y-1
hilim=x51 y51 z0
lobound=z0
softlim=1

[Abort Cushions]
lim_cnt=10
esc_step=10
lim_step=10

[Aux Outputs]
auxout=c1p4b0
auxout=c2p4b1
auxout=c3p4b2
auxout=c4p4b3
auxout=c5p4b4
auxout=c6p4b5
auxout=c7p4b6
auxout=c8p4b7

[Aux Outputs]
auxin=c1p0b0
auxin=c2p0b1
auxin=c3p0b2
auxin=c4p0b3
auxin=c5p0b4
auxin=c6p0b5
auxin=c7p0b6
auxin=c8p0b7

[G28 Settings]
g28move=z-.25 w-.25 l10 m1 f200
g28move=x1.5 y1.5 l20 m1 f200

[File Types]
filetype=*.TAP;*.BMP;*.NC

[cabnet636]

here is txt file for the manual


jim

[jdr]

It might be nice to have a WinCNC category by itself on the CNCZone

This would keep all the WinCNC in one place.

Jack

[cabnet636]

http://www.cnczone.com/forums/suggestions_cnczone_com_site/

[cabnet636]

they would probably put that here, by having camaster/shopsabre forums
then threads could be kept here

http://www.cnczone.com/forums/index.php#machine_controllers_software_solutions

[jdr]

WinCNC does belong under the Machine Controllers. Perfect spot James.

Jack