Results 1 to 4 of 4

Thread: Wincnc post for Cabinetparts

  1. #1
    Registered
    Join Date
    Oct 2006
    Location
    USA
    Posts
    7
    Downloads
    0
    Uploads
    0

    Wincnc post for Cabinetparts

    Does anyone have a post for Wincnc that will work on cabinetparts(www.cabinetparts.com)? I have tried Mach2 and it does post but when viewing the post it so far to right of the table. The orientation is off to the rightside of the table and is 90 out with x and y. PS this a great little cabinet program if I could get it to run under Wincnc.

    Thanks guys




  2. #2
    Registered
    Join Date
    Dec 2006
    Location
    australia
    Posts
    877
    Downloads
    0
    Uploads
    0
    G`day George, Your timing is great. Forum member cabnet636 has only in the last week upgraded his machine to wincnc and is trialling cabinetpartspro on the machine. He posts regularly on the thread ' Excitech cnc router purchase' in the commercial wood router section.

    Rocket.


  3. #3
    Registered
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2387
    Downloads
    0
    Uploads
    0

    george

    my cell battery died during our phone call today glad you are liking your new camaster, we will get these things going!! come on over to this thread

    jim mcgrew

    call me again i did not have your number to call you back

    i am cabnet or cabnet 636
    http://www.cnczone.com/forums/showth...181#post398181

    ps cut to the bone is joey the guy who set you up with wincnc

    see the new screen control just scroll back a few post jim


  4. #4
    Registered
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2387
    Downloads
    0
    Uploads
    0
    george, how is your cabinetry coming?

    jim
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com https://www.dropcam.com/p/PFmTOV


Similar Threads

  1. MasterCAM Post - CNT Router w/ WinCNC Controller Help!!
    By m_marenghi in forum Post Processors for MC
    Replies: 3
    Last Post: 06-08-2009, 02:57 PM
  2. mastercam post for practical cnc/wincnc
    By teacher in forum Post Processors for MC
    Replies: 5
    Last Post: 08-03-2008, 10:40 PM
  3. Post for WinCNC Controller 2.1
    By tgramel in forum WinCnc
    Replies: 2
    Last Post: 03-31-2008, 06:56 PM
  4. Post needed for WinCNC
    By behn in forum WinCnc
    Replies: 4
    Last Post: 02-19-2008, 03:26 PM
  5. Surfcam to WinCNC controller post needed
    By behn in forum Post Processor Files
    Replies: 0
    Last Post: 10-19-2006, 11:31 AM

Posting Permissions



About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.