If it wouldn't be to bulky. I'd think regular solder would hold. Lay part 2 along part 1 twist a short length of fine copper wire around the 2 pieces & solder using an iron or gun.
Can anyone tell me the best way to weld these two peices together I dont want to heat up the double hook so as to lose its temper in the steel weeking it I need to know what is the best way to do this and most cost affective the two pieces are bronze coated carbon steel
Similar Threads:
If it wouldn't be to bulky. I'd think regular solder would hold. Lay part 2 along part 1 twist a short length of fine copper wire around the 2 pieces & solder using an iron or gun.
If it works.....Don't fix it!