LinkBack URL
About LinkBacks
Anyone?
| | |
I see tables here 'n' there that are in my price range. But the cutting area is small. I can find plenty that are long enough, but the width isn't wide enough. Is it easy to make a tables cutting area wider, if needed?
-Steve
Anyone?
Are you talking about Travel or Work Area Extending?
Is this a Manual or CNC?
DIY or Factory Built?
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Work area... wouldn't that also change travel? CNC. Don't own one yet, so I'll go with factory built.Originally Posted by tobyaxis
-Steve
You can't change the Travels without Modifying the Machine. This could be Expensive or near impossible.
Work Area can be Extended.
What type or brand of machine are you thinking about?
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
I'm not sure,lol. Just getting into this stuff. I'd like something with a cutting area of 24x 18x 3x. I see some that have 24x 12x for relatively cheap. That's why I was wondering if it was possible to make it wider.
Many in here build their own machines. You can follow threads to get ideas or ask questions. This place is HUGE!!!
Go to the main page and you will see where to start looking.
Cheers!!
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Thanks.Many in here build their own machines. You can follow threads to get ideas or ask questions. This place is HUGE!!!
Go to the main page and you will see where to start looking.
Cheers!!
Steven,
You might check out www.finelineautomation.com for a complete kit with 36" x 24" cutting area. You'll have to put it together yourself, but the plans are pretty clear, and it's a great value. I know, since I helped design it
Ahren
www.cncrouterparts.com
Cool. I will look into that too. Thanks.Steven,
You might check out www.finelineautomation.com for a complete kit with 36" x 24" cutting area. You'll have to put it together yourself, but the plans are pretty clear, and it's a great value. I know, since I helped design it
Ahren
www.cncrouterparts.com
-Steve
Posting Permissions
| | |
