Found this, might help not sure:
My shop came equipped with a JET Milling/Drilling Machine model JMD-18 and collets that I have been using these cutters with.
I have tried Fedlog and checked every possible part number/NSN combination I could think of with all the numbers on the box and cutter.
Ive tried Yahoo and Google and a DoAll website and come up empty.
Unfortunately I am the subject matter expert in my area and we deploy to Afghanistan later this year so time for me is running short.
(I know from experience from my last two deployments that I need them, but our new welder thought they would be great for cleaning off slag so now I'm down to two)
If possible an NSN or something I can order through the Army supply system would be preferred.
If not, I'm all for generics.
(There is a slight chance I may have to pay out of pocket so they only need to last for one deployment)
I'm particularly looking for diameters of 3/4, 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/4", and 2-1/2" with shank diameters anywhere from 1/2' up to one inch.
Any help would be appreciated.
-SGT White, 44E20
You may want to look at tooling with carbide inserts as well Take a look at LoveJoy Tool
& AB Tooling these are both have very good tooling
You were dead on Scrap.
Thank you very much
Thank you to Mactec.
I'm liking what I see at LoveJoy.
I'll try and sell that to my maintenance officer.
Doubt it, but I can try
You're welcome Sarge, a little morning coffee, a little creative Googling. Have a great weekend.