Techno 067 feedback requested

[rbartko]

I am looking at a Techno Isel model 067 for my shop. Can someone provide their experience with this particular CNC? Any feedback is appreciated.

Rich
rbartko at aristec.com

[avayan]

Have you been able to get any information on these machines? I will be looking at an used Techno machine (do not have the model number) and am amazed there is not much here @ cnczone about this brand.

They are German, so I would imagine they are excellent, but would like to read what others have to say before I cash out so many grands out of my pocket.

My intention is hobby with the aspiration to do a few jobs here and there and at least pay for some of it, but knowing how my entrepreneurship has resulted in the past, I am not holding my breath on getting it to pay for itself.

Thanks for any input you may provide!

[rbartko]

Hello Avayan,

I would be happy to share what I have found on the machine I am looking at and may have a machine for you to consider.

Feel free to contact me offline at rbartko at aristec.com or at 512 868 2862.

I am in Georgetown, TX just north of Austin. If you are within driving distance you may be interested in a free CNC oriented 2 day event at the end of February in Austin. Always a great learning experience.

Rich