Looking for Anilam M control schematic

[Enzo Falconi]

I'm trying to locate a circuit diagram for the PCB 523 rev "C" 8 bit cpu board for an Anilam Crusader M. I have already contacted many repair shops and Anilam without success. I have the digrams for the A & B revisions, but my control has the 523 Rev C. The C board is quite a bit different than the A or B. Any leads to the purchase or loan of a Rev C diagram would be appreciated.

Thanks

Michael

[tpodgwaite]

Hi Michael, I have a set of prints that are labeled rev B for the 523 board, but I am not sure if that means board rev B or print rev B. I'll happily e-mail them to you if you still want to have a look. -Tim

[Enzo Falconi]

I finally gave up on repairing these old boards and I've obtained a Galil card that will replace all the boards. It will be awhile before the conversion gets completed. I'm hoping that the conversion to a PC based controller will end the problems I've had over the years maintaining the original M system.

Thanks for the reply and offer

Michael