- Camtech Routermaster II parts
-
Registered
Camtech Routermaster II parts
We have been using our Camtech Routermaster II for more than 5 years and apparently we can't find spare parts anymore. Anyone who knows where to buy or anybody interested in buying our working parts.
The machine is still running before the stepper card was damaged. Everything else is working. 4x8 table.
Albert Pedrosa
GraphicStar
inquiry.sales@graphicstar.com.ph
Similar Threads:
-
-
Registered
-
Registered
Camtech with controller
This is an older table top design in good condition and ready to perform. Table is 24x24 and perske spindle is 3HP phase three. Also included in package is camplot software, Phase 3 converter(takes single phase power supply to 3 phase and various end mills. If you're local we can setup an appointment to run machine for you. Located in Spokane WA
$1500
Ken
(509)251-2904
-
Registered
I need camtech parts
Hello-I am missing the hardware key for a router master z7. Camtech does not repair these controls anymore. do you still have this table? i would like to buy the controls from you is possible?
thanks
-
Registered
-
Registered
CAM Tech CMC3 controllers are really from Wincnc.net, you can talk to them and get your hardware key replaced/updated.
-
Registered
Camtech Controller
I have a spare Camtech controller with all the cards if that of interest
-
Registered
need camtech stpper card z axis
-
Registered
our routermaster z7 from camtech has just gone down stepper card is to blame
i found a company in us/canada last year who said they make the cards any ideas guys please pretty please with a cherry on top
-
Registered
I have a complete CAM Tech CMC3 controller that seems to be in working order..
all cards, as removed from controller..
contact me via private message only.
router master 52 4 axis drive..
also have stepper motors from the same machine avail..
e2l2
-
Registered
Re: Camtech Routermaster II parts
Dear Mr Albert may I know if your Camtech Routermaster II is still available?
Earl Tan
- Camtech Routermaster II parts
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules