- Hardinge HC Turret Parts
-
Member
Hardinge HC Turret Parts
I just picked up an HC Chucker with the 8 position turret that I'm going to convert to CNC. Unfortunately it is missing the center turret shaft with the gear on the bottom and spline on top, the rod gear(helical I think) that is between the handle to rotate and lock the turret and the turret shaft, the bottom turret bearing and sleeve/spacer. It is also missing the 5C collet draw tube parts. It has a little hydraulic unit for the collet closer but nothing else. The taper is in the spindle.
Anyone know where I can find these parts for a reasonable price?
Thanks!
Mike
Similar Threads:
-
-
Registered
Re: Hardinge HC Turret Parts
Hey there! I might be able to help actually. I work for a company that locates machinery/tooling/equipment/parts for free and for very reasonable prices. PM me or email me at machinerylistingserviceimp@gmail.com
-Alissa
-
Registered
Re: Hardinge HC Turret Parts
Howdy, email me tom at 02Again dot com I have some chnc parts as well as a complete machine with a fagor control I will sell cheaper then you could possibly build one
tom
Last edited by mctraps; 04-17-2018 at 02:18 AM.
Reason: misspell
- Hardinge HC Turret Parts
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules