Butch,
What is your requirement for the chuck diameter?
Jeff...
As sold on eBay https://www.ebay.com/itm/Nema23-Worm....c100290.m3507
Any suggestions?
Thanks
Similar Threads:
Butch,
What is your requirement for the chuck diameter?
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
No chuck involved. In the item pictured, stepper motor input shaft and the worm gear output shaft are both 14mm.
I am looking for a larger stepper motor and a 0.75 to 1.0 inch (19 to 25mm) output shaft.
Butch,
Since The Amazing Kreskin has left the building, posting a little more pertinent information such as reduction ratio and backlash requirement might expedite your request for information,
Have a most awesome evening!
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
Jim Dawson
Sandy, Oregon, USA
Jim,
Don't forget the flange adapter, most of those gearboxes are for a 56C motor.
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
I thought that's why we have machine tools
Jim Dawson
Sandy, Oregon, USA
Jim,
I agree, if someone wanted to turn a few sleeves on a lathe and mill a Nema 23 to 34 adapter plate, the eBay gearboxes might work however that would require thinking outside the box.
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.