Hey All,
I'm looking for an ATC spindle at least 10hp. Brand doesn't matter so much but would like HSD and ISO30. Thanks.
DJ
Similar Threads:
- Quick Change Spindle Adapter for Chinese 2.2kw Spindle? Spindle acronyms?
- Problem- C11T board - spindle 0-10v output wandering and causing inconsistent spindle speed
- Need Help!- Installed spindle power quick change, now my spindle is dead, need motor resistance
- Spindle motor set,1pcs 2.2kw spindle + inverter+ spindle mount bracket+ER collet
- Problem- mach3 spindle dro not working, spindle speed changing while jogging and running code
I would like to buy a used HSD spindle (919/929) but am not being overly picky. I need a 10hp ATC ISO30 spindle....water or air cooled.
for 10kW iso 40 is common size.
Iso 30 has no sense.
Price depends mainly on RPM and torque requirement.
Hi Fifa,
Funny because I have 3 10hp 7.5kw ISO 30 taper ER32 spindles. It is common in woodworking.
I know price depends on those things. That's not what I'm asking. I'm asking if anyone has one for sale.
Thanks.
OK
I got it.
Here in EU ISO 30 is not common for this power. ISO 40 with oil mist lubrication is preferred.
Price for new ca 2500 EUR, 24.000 rpm.
regards
regards
I've got an 11kw spindle from a Biesse Rover. ISO 30. It weighs about 100 lbs. Planning to use it on my build. I might consider selling it for the right price. I haven't used it myself yet, but the person I bought it from swore up and down that it was it good working order. From the stickers on it, looks like it has been rebuilt.
Of course $$ talks. There are a couple other routes I could go if I let go of this.
Send me a PM if you're interested, and we can talk.
https://www.cncpd.com/product/colomb...le-motor-460v/
(very expensive in States)
hope it helps