ATC Spindle


Results 1 to 8 of 8

Thread: ATC Spindle

  1. #1


  2. #2
    Registered
    Join Date
    Aug 2017
    Location
    China
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: ATC Spindle

    Quote Originally Posted by uberdoom View Post
    Hey All,

    I'm looking for an ATC spindle at least 10hp. Brand doesn't matter so much but would like HSD and ISO30. Thanks.

    DJ
    You want to buy ATC Spindle HSD spdindle



  3. #3
    Registered
    Join Date
    Feb 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: ATC Spindle

    I would like to buy a used HSD spindle (919/929) but am not being overly picky. I need a 10hp ATC ISO30 spindle....water or air cooled.



  4. #4
    Registered
    Join Date
    Jun 2009
    Location
    si
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: ATC Spindle

    for 10kW iso 40 is common size.
    Iso 30 has no sense.

    Price depends mainly on RPM and torque requirement.



  5. #5
    Registered
    Join Date
    Feb 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: ATC Spindle

    Hi Fifa,

    Funny because I have 3 10hp 7.5kw ISO 30 taper ER32 spindles. It is common in woodworking.

    I know price depends on those things. That's not what I'm asking. I'm asking if anyone has one for sale.

    Thanks.



  6. #6
    Registered
    Join Date
    Jun 2009
    Location
    si
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: ATC Spindle

    OK
    I got it.

    Here in EU ISO 30 is not common for this power. ISO 40 with oil mist lubrication is preferred.

    Price for new ca 2500 EUR, 24.000 rpm.

    regards

    regards



  7. #7
    Member
    Join Date
    May 2011
    Location
    Canada
    Posts
    790
    Downloads
    0
    Uploads
    0

    Default Re: ATC Spindle

    I've got an 11kw spindle from a Biesse Rover. ISO 30. It weighs about 100 lbs. Planning to use it on my build. I might consider selling it for the right price. I haven't used it myself yet, but the person I bought it from swore up and down that it was it good working order. From the stickers on it, looks like it has been rebuilt.

    Of course $$ talks. There are a couple other routes I could go if I let go of this.

    Send me a PM if you're interested, and we can talk.



  8. #8
    Registered
    Join Date
    Jun 2009
    Location
    si
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: ATC Spindle

    https://www.cncpd.com/product/colomb...le-motor-460v/

    (very expensive in States)

    hope it helps



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ATC Spindle

ATC Spindle