Thank you!
New to the CNC stuff. I primarily deal with woods and some engraving. Wood products are small to medium size, like coat racks, gun racks, light switch covers ect. The engraving is for dog headstones type items. Which of these machines would best suit my need? I cannot decide and figured I would ask the real in the field knowledgeable people!!! Thank you so much in advance!!CNC Shark Routing System, with New 7.0 Software | Rockler Woodworking and Hardware or https://stepcraft.us/product/stepcra...op-cnc-system/
Similar Threads:
Thank you!
I've never seen a Stepcraft, but the Shark is way overpriced.
And the Stepcraft runs UCCNC, which is far superior to the Shark control.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I've only seen the Shark Pro here and for a machine made primarily out of plastic with crappy unsupported round rails, it's an absurd cost IMO. The profit margin on them must be astronomical surely, as it's made from very cheap materials?
The Stepcraft looks to be better, but is still well overpriced I think.
But if I really had to choose between them, I'd likely go the Stepcraft I think.
cheers, Ian
It's a state of mind!
Thank you everyone for all your input...much appreciated!!