One Servo Trapezoidal(hall sensor) Please.

[dracozny]

Building my Zx45, need one more DC servo. Trapezoidals seem to be cheap just harder to come by and I don't like brushed motors, just my personal taste.
I have the AMC drives to run them. I have two ABB servos but brand doesn't have to match.
Looking for something in the 2-3 Nm stall torque range, 10+Nm peak(thats roughly 1400oz-in peak) for my Z axis.

Similar Threads:

• Which servo drive can handle AC motor without Hall feedback?
• had to replace my hall effect sensor.....
• Need Help!- Hall effect sensor
• Brushless Servo Hall Sensor Output
• Hall sensor connection

[dracozny]

bump

[Al_The_Man]

If you are looking for BLDC, then I usually source Tamagawa or Applied Motion on ebay, you need to check the model number for standard encoder with commutation track.
Al.

[dracozny]

I have been searching Ebay for quite some time, I came across the two ADB motors I have now on there.
"Applied Motion" generally results in stepper motors or motors that are well below the specs I need.
"Tamagawa" has been resulting in mostly AC Servos and Steppers.
I will ofcourse keep looking but I figured someone here at CNCZone might have something laying about.