basic pocketing question

[lostpinky]

I have a basic oval that I need to pocket. My end mill is not a center cut end mill so I need to ramp in. I created the following Gcode and I don't understand why the tool is returning to 1" on line 101 and then starting the ramp over in the positive Z wasting a bunch of time
What box did I fill out wrong?

N1O001
N2 M25 G49
N3 G17 G40
N4 G20
N5 G80
N6 G90
N7 G98
N8 ;2 1/2 Axis Pocketing
N9 T1 M06
N10 G0 X5.941 Y1.313 S5000 M3
N11 G43 Z0.25 H1
N12 M9
N13 G1 X6.688 Z-0.022 F15.
N14 X6.695 Z-0.024
N15 X6.702 Y1.314 Z-0.027
N16 X6.71 Y1.317 Z-0.03
N17 X6.717 Y1.32 Z-0.033
N18 X6.723 Y1.324 Z-0.035
N19 X6.729 Y1.328 Z-0.038
N20 X6.734 Y1.334 Z-0.041
N21 X6.739 Y1.34 Z-0.044
N22 X6.743 Y1.346 Z-0.046
N23 X6.746 Y1.353 Z-0.049
N24 X6.748 Y1.36 Z-0.052
N25 X6.75 Y1.368 Z-0.055
N26 Y1.375 Z-0.057
N27 Y1.383 Z-0.06
N28 X6.748 Y1.39 Z-0.063
N29 X6.746 Y1.397 Z-0.066
N30 X6.743 Y1.404 Z-0.068
N31 X6.739 Y1.411 Z-0.071
N32 X6.734 Y1.416 Z-0.074
N33 X6.729 Y1.422 Z-0.077
N34 X6.723 Y1.426 Z-0.079
N35 X6.717 Y1.43 Z-0.082
N36 X6.71 Y1.433 Z-0.085
N37 X6.702 Y1.436 Z-0.088
N38 X6.695 Y1.437 Z-0.09
N39 X6.688 Y1.438 Z-0.093
N40 X5.688
N41 X5.664 Y1.433
N42 X5.643 Y1.419
N43 X5.63 Y1.399
N44 X5.625 Y1.375
N45 X5.63 Y1.351
N46 X5.643 Y1.331
N47 X5.664 Y1.317
N48 X5.688 Y1.313
N49 X6.688
N50 X6.711 Y1.317
N51 X6.732 Y1.331
N52 X6.745 Y1.351
N53 X6.75 Y1.375
N54 X6.745 Y1.399
N55 X6.732 Y1.419
N56 X6.711 Y1.433
N57 X6.688 Y1.438
N58 Y1.688
N59 X5.688
N60 X5.636 Y1.683
N61 X5.586 Y1.671
N62 X5.539 Y1.65
N63 X5.496 Y1.622
N64 X5.458 Y1.587
N65 X5.426 Y1.546
N66 X5.401 Y1.501
N67 X5.385 Y1.452
N68 X5.376 Y1.401
N69 Y1.349
N70 X5.385 Y1.298
N71 X5.401 Y1.25
N72 X5.426 Y1.204
N73 X5.458 Y1.163
N74 X5.496 Y1.128
N75 X5.539 Y1.1
N76 X5.586 Y1.079
N77 X5.636 Y1.067
N78 X5.688 Y1.063
N79 X6.688
N80 X6.739 Y1.067
N81 X6.789 Y1.079
N82 X6.836 Y1.1
N83 X6.879 Y1.128
N84 X6.917 Y1.163
N85 X6.949 Y1.204
N86 X6.974 Y1.25
N87 X6.99 Y1.298
N88 X6.999 Y1.349
N89 Y1.401
N90 X6.99 Y1.452
N91 X6.974 Y1.501
N92 X6.949 Y1.546
N93 X6.917 Y1.587
N94 X6.879 Y1.622
N95 X6.836 Y1.65
N96 X6.789 Y1.671
N97 X6.739 Y1.683
N98 X6.688 Y1.688
N99 G0 Z0.25
N100 X5.685 Y1.313
N101 G1 Z1. F15.
N102 Z0.25
N103 X5.688 Z0.249
N104 X6.688 Z-0.115
N105 X6.695 Z-0.117
N106 X6.702 Y1.314 Z-0.12
N107 X6.71 Y1.317 Z-0.123
N108 X6.717 Y1.32 Z-0.126
N109 X6.723 Y1.324 Z-0.128
N110 X6.729 Y1.328 Z-0.131
N111 X6.734 Y1.334 Z-0.134
N112 X6.739 Y1.34 Z-0.137
N113 X6.743 Y1.346 Z-0.139
N114 X6.746 Y1.353 Z-0.142
N115 X6.748 Y1.36 Z-0.145
N116 X6.75 Y1.368 Z-0.148
N117 Y1.375 Z-0.15
N118 Y1.383 Z-0.153
N119 X6.748 Y1.39 Z-0.156
N120 X6.746 Y1.397 Z-0.159
N121 X6.743 Y1.404 Z-0.161
N122 X6.739 Y1.411 Z-0.164
N123 X6.734 Y1.416 Z-0.167
N124 X6.729 Y1.422 Z-0.17
N125 X6.723 Y1.426 Z-0.172
N126 X6.717 Y1.43 Z-0.175
N127 X6.71 Y1.433 Z-0.178
N128 X6.702 Y1.436 Z-0.181
N129 X6.695 Y1.437 Z-0.183
N130 X6.688 Y1.438 Z-0.186
N131 X5.688
N132 X5.664 Y1.433
N133 X5.643 Y1.419
N134 X5.63 Y1.399
N135 X5.625 Y1.375
N136 X5.63 Y1.351
N137 X5.643 Y1.331
N138 X5.664 Y1.317
N139 X5.688 Y1.313
N140 X6.688
N141 X6.711 Y1.317
N142 X6.732 Y1.331
N143 X6.745 Y1.351
N144 X6.75 Y1.375
N145 X6.745 Y1.399
N146 X6.732 Y1.419
N147 X6.711 Y1.433
N148 X6.688 Y1.438
N149 Y1.688
N150 X5.688
N151 X5.636 Y1.683
N152 X5.586 Y1.671
N153 X5.539 Y1.65
N154 X5.496 Y1.622
N155 X5.458 Y1.587
N156 X5.426 Y1.546
N157 X5.401 Y1.501
N158 X5.385 Y1.452
N159 X5.376 Y1.401
N160 Y1.349
N161 X5.385 Y1.298
N162 X5.401 Y1.25
N163 X5.426 Y1.204
N164 X5.458 Y1.163
N165 X5.496 Y1.128
N166 X5.539 Y1.1
N167 X5.586 Y1.079
N168 X5.636 Y1.067
N169 X5.688 Y1.063
N170 X6.688
N171 X6.739 Y1.067
N172 X6.789 Y1.079
N173 X6.836 Y1.1
N174 X6.879 Y1.128
N175 X6.917 Y1.163
N176 X6.949 Y1.204
N177 X6.974 Y1.25
N178 X6.99 Y1.298
N179 X6.999 Y1.349
N180 Y1.401
N181 X6.99 Y1.452
N182 X6.974 Y1.501
N183 X6.949 Y1.546
N184 X6.917 Y1.587
N185 X6.879 Y1.622
N186 X6.836 Y1.65
N187 X6.789 Y1.671
N188 X6.739 Y1.683
N189 X6.688 Y1.688
N190 G0 Z0.25
N191 X5.669 Y1.435
N192 G1 Z0.971 F15.
N193 Z0.221
N194 X5.665 Y1.433 Z0.219
N195 X5.658 Y1.43 Z0.217
N196 X5.652 Y1.426 Z0.214
N197 X5.646 Y1.422 Z0.211
N198 X5.641 Y1.416 Z0.208
N199 X5.636 Y1.411 Z0.206
N200 X5.632 Y1.404 Z0.203
N201 X5.629 Y1.397 Z0.2
N202 X5.627 Y1.39 Z0.197
N203 X5.625 Y1.383 Z0.195
N204 Y1.375 Z0.192
N205 Y1.368 Z0.189
N206 X5.627 Y1.36 Z0.186
N207 X5.629 Y1.353 Z0.184
N208 X5.632 Y1.346 Z0.181
N209 X5.636 Y1.34 Z0.178
N210 X5.641 Y1.334 Z0.175
N211 X5.646 Y1.328 Z0.173
N212 X5.652 Y1.324 Z0.17
N213 X5.658 Y1.32 Z0.167
N214 X5.665 Y1.317 Z0.164
N215 X5.673 Y1.314 Z0.162
N216 X5.68 Y1.313 Z0.159
N217 X5.688 Z0.156
N218 X6.688 Z-0.208
N219 X6.695 Z-0.211
N220 X6.702 Y1.314 Z-0.213
N221 X6.71 Y1.317 Z-0.216
N222 X6.717 Y1.32 Z-0.219
N223 X6.723 Y1.324 Z-0.222
N224 X6.729 Y1.328 Z-0.224
N225 X6.734 Y1.334 Z-0.227
N226 X6.739 Y1.34 Z-0.23
N227 X6.743 Y1.346 Z-0.233
N228 X6.746 Y1.353 Z-0.235
N229 X6.748 Y1.36 Z-0.238
N230 X6.75 Y1.368 Z-0.241
N231 Y1.375 Z-0.244
N232 Y1.383 Z-0.246
N233 X6.748 Y1.39 Z-0.249
N234 X6.746 Y1.397 Z-0.252
N235 X6.743 Y1.404 Z-0.255
N236 X6.739 Y1.411 Z-0.257
N237 X6.734 Y1.416 Z-0.26
N238 X6.729 Y1.422 Z-0.263
N239 X6.723 Y1.426 Z-0.265
N240 X6.717 Y1.43 Z-0.268
N241 X6.71 Y1.433 Z-0.271
N242 X6.702 Y1.436 Z-0.274
N243 X6.695 Y1.437 Z-0.276
N244 X6.688 Y1.438 Z-0.279
N245 X5.688
N246 X5.664 Y1.433
N247 X5.643 Y1.419
N248 X5.63 Y1.399
N249 X5.625 Y1.375
N250 X5.63 Y1.351
N251 X5.643 Y1.331
N252 X5.664 Y1.317
N253 X5.688 Y1.313
N254 X6.688
N255 X6.711 Y1.317
N256 X6.732 Y1.331
N257 X6.745 Y1.351
N258 X6.75 Y1.375
N259 X6.745 Y1.399
N260 X6.732 Y1.419
N261 X6.711 Y1.433
N262 X6.688 Y1.438
N263 Y1.688
N264 X5.688
N265 X5.636 Y1.683
N266 X5.586 Y1.671
N267 X5.539 Y1.65
N268 X5.496 Y1.622
N269 X5.458 Y1.587
N270 X5.426 Y1.546
N271 X5.401 Y1.501
N272 X5.385 Y1.452
N273 X5.376 Y1.401
N274 Y1.349
N275 X5.385 Y1.298
N276 X5.401 Y1.25
N277 X5.426 Y1.204
N278 X5.458 Y1.163
N279 X5.496 Y1.128
N280 X5.539 Y1.1
N281 X5.586 Y1.079
N282 X5.636 Y1.067
N283 X5.688 Y1.063
N284 X6.688
N285 X6.739 Y1.067
N286 X6.789 Y1.079
N287 X6.836 Y1.1
N288 X6.879 Y1.128
N289 X6.917 Y1.163
N290 X6.949 Y1.204
N291 X6.974 Y1.25
N292 X6.99 Y1.298
N293 X6.999 Y1.349
N294 Y1.401
N295 X6.99 Y1.452
N296 X6.974 Y1.501
N297 X6.949 Y1.546
N298 X6.917 Y1.587
N299 X6.879 Y1.622
N300 X6.836 Y1.65
N301 X6.789 Y1.671
N302 X6.739 Y1.683
N303 X6.688 Y1.688
N304 G0 Z0.25
N305 X5.669 Y1.435
N306 G1 Z0.878 F15.
N307 Z0.128
N308 X5.665 Y1.433 Z0.126
N309 X5.658 Y1.43 Z0.123
N310 X5.652 Y1.426 Z0.121
N311 X5.646 Y1.422 Z0.118
N312 X5.641 Y1.416 Z0.115
N313 X5.636 Y1.411 Z0.113
N314 X5.632 Y1.404 Z0.11
N315 X5.629 Y1.397 Z0.107
N316 X5.627 Y1.39 Z0.104
N317 X5.625 Y1.383 Z0.102
N318 Y1.375 Z0.099
N319 Y1.368 Z0.096
N320 X5.627 Y1.36 Z0.093
N321 X5.629 Y1.353 Z0.091
N322 X5.632 Y1.346 Z0.088
N323 X5.636 Y1.34 Z0.085
N324 X5.641 Y1.334 Z0.082
N325 X5.646 Y1.328 Z0.08
N326 X5.652 Y1.324 Z0.077
N327 X5.658 Y1.32 Z0.074
N328 X5.665 Y1.317 Z0.071
N329 X5.673 Y1.314 Z0.069
N330 X5.68 Y1.313 Z0.066
N331 X5.688 Z0.063
N332 X6.688 Z-0.301
N333 X6.695 Z-0.304
N334 X6.702 Y1.314 Z-0.306
N335 X6.71 Y1.317 Z-0.309
N336 X6.717 Y1.32 Z-0.312
N337 X6.723 Y1.324 Z-0.315
N338 X6.729 Y1.328 Z-0.317
N339 X6.734 Y1.334 Z-0.32
N340 X6.739 Y1.34 Z-0.323
N341 X6.743 Y1.346 Z-0.326
N342 X6.746 Y1.353 Z-0.328
N343 X6.748 Y1.36 Z-0.331
N344 X6.75 Y1.368 Z-0.334
N345 Y1.375 Z-0.337
N346 Y1.383 Z-0.339
N347 X6.748 Y1.39 Z-0.342
N348 X6.746 Y1.397 Z-0.345
N349 X6.743 Y1.404 Z-0.348
N350 X6.739 Y1.411 Z-0.35
N351 X6.734 Y1.416 Z-0.353
N352 X6.729 Y1.422 Z-0.356
N353 X6.723 Y1.426 Z-0.359
N354 X6.717 Y1.43 Z-0.361
N355 X6.71 Y1.433 Z-0.364
N356 X6.702 Y1.436 Z-0.367
N357 X6.695 Y1.437 Z-0.37
N358 X6.688 Y1.438 Z-0.372
N359 X5.688
N360 X5.664 Y1.433
N361 X5.643 Y1.419
N362 X5.63 Y1.399
N363 X5.625 Y1.375
N364 X5.63 Y1.351
N365 X5.643 Y1.331
N366 X5.664 Y1.317
N367 X5.688 Y1.313
N368 X6.688
N369 X6.711 Y1.317
N370 X6.732 Y1.331
N371 X6.745 Y1.351
N372 X6.75 Y1.375
N373 X6.745 Y1.399
N374 X6.732 Y1.419
N375 X6.711 Y1.433
N376 X6.688 Y1.438
N377 Y1.688
N378 X5.688
N379 X5.636 Y1.683
N380 X5.586 Y1.671
N381 X5.539 Y1.65
N382 X5.496 Y1.622
N383 X5.458 Y1.587
N384 X5.426 Y1.546
N385 X5.401 Y1.501
N386 X5.385 Y1.452
N387 X5.376 Y1.401
N388 Y1.349
N389 X5.385 Y1.298
N390 X5.401 Y1.25
N391 X5.426 Y1.204
N392 X5.458 Y1.163
N393 X5.496 Y1.128
N394 X5.539 Y1.1
N395 X5.586 Y1.079
N396 X5.636 Y1.067
N397 X5.688 Y1.063
N398 X6.688
N399 X6.739 Y1.067
N400 X6.789 Y1.079
N401 X6.836 Y1.1
N402 X6.879 Y1.128
N403 X6.917 Y1.163
N404 X6.949 Y1.204
N405 X6.974 Y1.25
N406 X6.99 Y1.298
N407 X6.999 Y1.349
N408 Y1.401
N409 X6.99 Y1.452
N410 X6.974 Y1.501
N411 X6.949 Y1.546
N412 X6.917 Y1.587
N413 X6.879 Y1.622
N414 X6.836 Y1.65
N415 X6.789 Y1.671
N416 X6.739 Y1.683
N417 X6.688 Y1.688
N418 G0 Z0.25
N419 X5.669 Y1.435
N420 G1 Z0.785 F15.
N421 Z0.035
N422 X5.665 Y1.433 Z0.033
N423 X5.658 Y1.43 Z0.03
N424 X5.652 Y1.426 Z0.028
N425 X5.646 Y1.422 Z0.025
N426 X5.641 Y1.416 Z0.022
N427 X5.636 Y1.411 Z0.019
N428 X5.632 Y1.404 Z0.017
N429 X5.629 Y1.397 Z0.014
N430 X5.627 Y1.39 Z0.011
N431 X5.625 Y1.383 Z0.008
N432 Y1.375 Z0.006
N433 Y1.368 Z0.003
N434 X5.627 Y1.36 Z0.
N435 X5.629 Y1.353 Z-0.003
N436 X5.632 Y1.346 Z-0.005
N437 X5.636 Y1.34 Z-0.008
N438 X5.641 Y1.334 Z-0.011
N439 X5.646 Y1.328 Z-0.014
N440 X5.652 Y1.324 Z-0.016
N441 X5.658 Y1.32 Z-0.019
N442 X5.665 Y1.317 Z-0.022
N443 X5.673 Y1.314 Z-0.025
N444 X5.68 Y1.313 Z-0.027
N445 X5.688 Z-0.03
N446 X6.688 Z-0.394
N447 X6.695 Z-0.397
N448 X6.702 Y1.314 Z-0.399
N449 X6.71 Y1.317 Z-0.402
N450 X6.717 Y1.32 Z-0.405
N451 X6.723 Y1.324 Z-0.408
N452 X6.729 Y1.328 Z-0.41
N453 X6.734 Y1.334 Z-0.413
N454 X6.739 Y1.34 Z-0.416
N455 X6.743 Y1.346 Z-0.419
N456 X6.746 Y1.353 Z-0.421
N457 X6.748 Y1.36 Z-0.424
N458 X6.75 Y1.368 Z-0.427
N459 Y1.375 Z-0.43
N460 Y1.383 Z-0.432
N461 X6.748 Y1.39 Z-0.435
N462 X6.746 Y1.397 Z-0.438
N463 X6.743 Y1.404 Z-0.441
N464 X6.739 Y1.411 Z-0.443
N465 X6.734 Y1.416 Z-0.446
N466 X6.729 Y1.422 Z-0.449
N467 X6.723 Y1.426 Z-0.452
N468 X6.717 Y1.43 Z-0.454
N469 X6.71 Y1.433 Z-0.457
N470 X6.702 Y1.436 Z-0.46
N471 X6.695 Y1.437 Z-0.463
N472 X6.688 Y1.438 Z-0.465
N473 X5.688
N474 X5.664 Y1.433
N475 X5.643 Y1.419
N476 X5.63 Y1.399
N477 X5.625 Y1.375
N478 X5.63 Y1.351
N479 X5.643 Y1.331
N480 X5.664 Y1.317
N481 X5.688 Y1.313
N482 X6.688
N483 X6.711 Y1.317
N484 X6.732 Y1.331
N485 X6.745 Y1.351
N486 X6.75 Y1.375
N487 X6.745 Y1.399
N488 X6.732 Y1.419
N489 X6.711 Y1.433
N490 X6.688 Y1.438
N491 Y1.688
N492 X5.688
N493 X5.636 Y1.683
N494 X5.586 Y1.671
N495 X5.539 Y1.65
N496 X5.496 Y1.622
N497 X5.458 Y1.587
N498 X5.426 Y1.546
N499 X5.401 Y1.501
N500 X5.385 Y1.452
N501 X5.376 Y1.401
N502 Y1.349
N503 X5.385 Y1.298
N504 X5.401 Y1.25
N505 X5.426 Y1.204
N506 X5.458 Y1.163
N507 X5.496 Y1.128
N508 X5.539 Y1.1
N509 X5.586 Y1.079
N510 X5.636 Y1.067
N511 X5.688 Y1.063
N512 X6.688
N513 X6.739 Y1.067
N514 X6.789 Y1.079
N515 X6.836 Y1.1
N516 X6.879 Y1.128
N517 X6.917 Y1.163
N518 X6.949 Y1.204
N519 X6.974 Y1.25
N520 X6.99 Y1.298
N521 X6.999 Y1.349
N522 Y1.401
N523 X6.99 Y1.452
N524 X6.974 Y1.501
N525 X6.949 Y1.546
N526 X6.917 Y1.587
N527 X6.879 Y1.622
N528 X6.836 Y1.65
N529 X6.789 Y1.671
N530 X6.739 Y1.683
N531 X6.688 Y1.688
N532 G0 Z0.25
N533 X5.669 Y1.435
N534 G1 Z0.692 F15.
N535 Z-0.058
N536 X5.665 Y1.433 Z-0.06
N537 X5.658 Y1.43 Z-0.063
N538 X5.652 Y1.426 Z-0.065
N539 X5.646 Y1.422 Z-0.068
N540 X5.641 Y1.416 Z-0.071
N541 X5.636 Y1.411 Z-0.074
N542 X5.632 Y1.404 Z-0.076
N543 X5.629 Y1.397 Z-0.079
N544 X5.627 Y1.39 Z-0.082
N545 X5.625 Y1.383 Z-0.085
N546 Y1.375 Z-0.087
N547 Y1.368 Z-0.09
N548 X5.627 Y1.36 Z-0.093
N549 X5.629 Y1.353 Z-0.096
N550 X5.632 Y1.346 Z-0.098
N551 X5.636 Y1.34 Z-0.101
N552 X5.641 Y1.334 Z-0.104
N553 X5.646 Y1.328 Z-0.107
N554 X5.652 Y1.324 Z-0.109
N555 X5.658 Y1.32 Z-0.112
N556 X5.665 Y1.317 Z-0.115
N557 X5.673 Y1.314 Z-0.118
N558 X5.68 Y1.313 Z-0.12
N559 X5.688 Z-0.123
N560 X6.688 Z-0.487
N561 X6.695 Z-0.49
N562 X6.702 Y1.314 Z-0.493
N563 X6.71 Y1.317 Z-0.495
N564 X6.717 Y1.32 Z-0.498
N565 X6.723 Y1.324 Z-0.501
N566 X6.729 Y1.328 Z-0.504
N567 X6.734 Y1.334 Z-0.506
N568 X6.739 Y1.34 Z-0.509
N569 X6.743 Y1.346 Z-0.512
N570 X6.746 Y1.353 Z-0.515
N571 X6.748 Y1.36 Z-0.517
N572 X6.75 Y1.368 Z-0.52
N573 Y1.375 Z-0.523
N574 Y1.383 Z-0.526
N575 X6.748 Y1.39 Z-0.528
N576 X6.746 Y1.397 Z-0.531
N577 X6.743 Y1.404 Z-0.534
N578 X6.739 Y1.411 Z-0.536
N579 X6.734 Y1.416 Z-0.539
N580 X6.729 Y1.422 Z-0.542
N581 X6.723 Y1.426 Z-0.545
N582 X6.717 Y1.43 Z-0.547
N583 X6.71 Y1.433 Z-0.55
N584 X6.702 Y1.436 Z-0.553
N585 X6.695 Y1.437 Z-0.556
N586 X6.688 Y1.438 Z-0.558
N587 X5.688
N588 X5.664 Y1.433
N589 X5.643 Y1.419
N590 X5.63 Y1.399
N591 X5.625 Y1.375
N592 X5.63 Y1.351
N593 X5.643 Y1.331
N594 X5.664 Y1.317
N595 X5.688 Y1.313
N596 X6.688
N597 X6.711 Y1.317
N598 X6.732 Y1.331
N599 X6.745 Y1.351
N600 X6.75 Y1.375
N601 X6.745 Y1.399
N602 X6.732 Y1.419
N603 X6.711 Y1.433
N604 X6.688 Y1.438
N605 Y1.688
N606 X5.688
N607 X5.636 Y1.683
N608 X5.586 Y1.671
N609 X5.539 Y1.65
N610 X5.496 Y1.622
N611 X5.458 Y1.587
N612 X5.426 Y1.546
N613 X5.401 Y1.501
N614 X5.385 Y1.452
N615 X5.376 Y1.401
N616 Y1.349
N617 X5.385 Y1.298
N618 X5.401 Y1.25
N619 X5.426 Y1.204
N620 X5.458 Y1.163
N621 X5.496 Y1.128
N622 X5.539 Y1.1
N623 X5.586 Y1.079
N624 X5.636 Y1.067
N625 X5.688 Y1.063
N626 X6.688
N627 X6.739 Y1.067
N628 X6.789 Y1.079
N629 X6.836 Y1.1
N630 X6.879 Y1.128
N631 X6.917 Y1.163
N632 X6.949 Y1.204
N633 X6.974 Y1.25
N634 X6.99 Y1.298
N635 X6.999 Y1.349
N636 Y1.401
N637 X6.99 Y1.452
N638 X6.974 Y1.501
N639 X6.949 Y1.546
N640 X6.917 Y1.587
N641 X6.879 Y1.622
N642 X6.836 Y1.65
N643 X6.789 Y1.671
N644 X6.739 Y1.683
N645 X6.688 Y1.688
N646 G0 Z0.25
N647 X5.669 Y1.435
N648 G1 Z0.598 F15.
N649 Z-0.152
N650 X5.665 Y1.433 Z-0.153
N651 X5.658 Y1.43 Z-0.156
N652 X5.652 Y1.426 Z-0.158
N653 X5.646 Y1.422 Z-0.161
N654 X5.641 Y1.416 Z-0.164
N655 X5.636 Y1.411 Z-0.167
N656 X5.632 Y1.404 Z-0.169
N657 X5.629 Y1.397 Z-0.172
N658 X5.627 Y1.39 Z-0.175
N659 X5.625 Y1.383 Z-0.178
N660 Y1.375 Z-0.18
N661 Y1.368 Z-0.183
N662 X5.627 Y1.36 Z-0.186
N663 X5.629 Y1.353 Z-0.189
N664 X5.632 Y1.346 Z-0.191
N665 X5.636 Y1.34 Z-0.194
N666 X5.641 Y1.334 Z-0.197
N667 X5.646 Y1.328 Z-0.2
N668 X5.652 Y1.324 Z-0.202
N669 X5.658 Y1.32 Z-0.205
N670 X5.665 Y1.317 Z-0.208
N671 X5.673 Y1.314 Z-0.211
N672 X5.68 Y1.313 Z-0.213
N673 X5.688 Z-0.216
N674 X6.688 Z-0.58
N675 X6.695 Z-0.583
N676 X6.702 Y1.314 Z-0.586
N677 X6.71 Y1.317 Z-0.588
N678 X6.717 Y1.32 Z-0.591
N679 X6.723 Y1.324 Z-0.594
N680 X6.729 Y1.328 Z-0.597
N681 X6.734 Y1.334 Z-0.599
N682 X6.739 Y1.34 Z-0.602
N683 X6.743 Y1.346 Z-0.605
N684 X6.746 Y1.353 Z-0.608
N685 X6.748 Y1.36 Z-0.61
N686 X6.75 Y1.368 Z-0.613
N687 Y1.375 Z-0.616
N688 Y1.383 Z-0.619
N689 X6.748 Y1.39 Z-0.621
N690 X6.746 Y1.397 Z-0.624
N691 X6.743 Y1.404 Z-0.627
N692 X6.739 Y1.411 Z-0.63
N693 X6.734 Y1.416 Z-0.632
N694 X6.729 Y1.422 Z-0.635
N695 X6.723 Y1.426 Z-0.638
N696 X6.717 Y1.43 Z-0.641
N697 X6.71 Y1.433 Z-0.643
N698 X6.702 Y1.436 Z-0.646
N699 X6.695 Y1.437 Z-0.649
N700 X6.688 Y1.438 Z-0.652
N701 X5.688
N702 X5.664 Y1.433
N703 X5.643 Y1.419
N704 X5.63 Y1.399
N705 X5.625 Y1.375
N706 X5.63 Y1.351
N707 X5.643 Y1.331
N708 X5.664 Y1.317
N709 X5.688 Y1.313
N710 X6.688
N711 X6.711 Y1.317
N712 X6.732 Y1.331
N713 X6.745 Y1.351
N714 X6.75 Y1.375
N715 X6.745 Y1.399
N716 X6.732 Y1.419
N717 X6.711 Y1.433
N718 X6.688 Y1.438
N719 Y1.688
N720 X5.688
N721 X5.636 Y1.683
N722 X5.586 Y1.671
N723 X5.539 Y1.65
N724 X5.496 Y1.622
N725 X5.458 Y1.587
N726 X5.426 Y1.546
N727 X5.401 Y1.501
N728 X5.385 Y1.452
N729 X5.376 Y1.401
N730 Y1.349
N731 X5.385 Y1.298
N732 X5.401 Y1.25
N733 X5.426 Y1.204
N734 X5.458 Y1.163
N735 X5.496 Y1.128
N736 X5.539 Y1.1
N737 X5.586 Y1.079
N738 X5.636 Y1.067
N739 X5.688 Y1.063
N740 X6.688
N741 X6.739 Y1.067
N742 X6.789 Y1.079
N743 X6.836 Y1.1
N744 X6.879 Y1.128
N745 X6.917 Y1.163
N746 X6.949 Y1.204
N747 X6.974 Y1.25
N748 X6.99 Y1.298
N749 X6.999 Y1.349
N750 Y1.401
N751 X6.99 Y1.452
N752 X6.974 Y1.501
N753 X6.949 Y1.546
N754 X6.917 Y1.587
N755 X6.879 Y1.622
N756 X6.836 Y1.65
N757 X6.789 Y1.671
N758 X6.739 Y1.683
N759 X6.688 Y1.688
N760 G0 Z0.25
N761 X5.669 Y1.435
N762 G1 Z0.505 F15.
N763 Z-0.245
N764 X5.665 Y1.433 Z-0.246
N765 X5.658 Y1.43 Z-0.249
N766 X5.652 Y1.426 Z-0.252
N767 X5.646 Y1.422 Z-0.254
N768 X5.641 Y1.416 Z-0.257
N769 X5.636 Y1.411 Z-0.26
N770 X5.632 Y1.404 Z-0.263
N771 X5.629 Y1.397 Z-0.265
N772 X5.627 Y1.39 Z-0.268
N773 X5.625 Y1.383 Z-0.271
N774 Y1.375 Z-0.274
N775 Y1.368 Z-0.276
N776 X5.627 Y1.36 Z-0.279
N777 X5.629 Y1.353 Z-0.282
N778 X5.632 Y1.346 Z-0.285
N779 X5.636 Y1.34 Z-0.287
N780 X5.641 Y1.334 Z-0.29
N781 X5.646 Y1.328 Z-0.293
N782 X5.652 Y1.324 Z-0.296
N783 X5.658 Y1.32 Z-0.298
N784 X5.665 Y1.317 Z-0.301
N785 X5.673 Y1.314 Z-0.304
N786 X5.68 Y1.313 Z-0.306
N787 X5.688 Z-0.309
N788 X6.688 Z-0.673
N789 X6.695 Z-0.676
N790 X6.702 Y1.314 Z-0.679
N791 X6.71 Y1.317 Z-0.681
N792 X6.717 Y1.32 Z-0.684
N793 X6.723 Y1.324 Z-0.687
N794 X6.729 Y1.328 Z-0.69
N795 X6.734 Y1.334 Z-0.692
N796 X6.739 Y1.34 Z-0.695
N797 X6.743 Y1.346 Z-0.698
N798 X6.746 Y1.353 Z-0.701
N799 X6.748 Y1.36 Z-0.703
N800 X6.75 Y1.368 Z-0.706
N801 Y1.375 Z-0.709
N802 Y1.383 Z-0.712
N803 X6.748 Y1.39 Z-0.714
N804 X6.746 Y1.397 Z-0.717
N805 X6.743 Y1.404 Z-0.72
N806 X6.739 Y1.411 Z-0.723
N807 X6.734 Y1.416 Z-0.725
N808 X6.729 Y1.422 Z-0.728
N809 X6.723 Y1.426 Z-0.731
N810 X6.717 Y1.43 Z-0.734
N811 X6.71 Y1.433 Z-0.736
N812 X6.702 Y1.436 Z-0.739
N813 X6.695 Y1.437 Z-0.742
N814 X6.688 Y1.438 Z-0.745
N815 X5.688
N816 X5.664 Y1.433
N817 X5.643 Y1.419
N818 X5.63 Y1.399
N819 X5.625 Y1.375
N820 X5.63 Y1.351
N821 X5.643 Y1.331
N822 X5.664 Y1.317
N823 X5.688 Y1.313
N824 X6.688
N825 X6.711 Y1.317
N826 X6.732 Y1.331
N827 X6.745 Y1.351
N828 X6.75 Y1.375
N829 X6.745 Y1.399
N830 X6.732 Y1.419
N831 X6.711 Y1.433
N832 X6.688 Y1.438
N833 Y1.688
N834 X5.688
N835 X5.636 Y1.683
N836 X5.586 Y1.671
N837 X5.539 Y1.65
N838 X5.496 Y1.622
N839 X5.458 Y1.587
N840 X5.426 Y1.546
N841 X5.401 Y1.501
N842 X5.385 Y1.452
N843 X5.376 Y1.401
N844 Y1.349
N845 X5.385 Y1.298
N846 X5.401 Y1.25
N847 X5.426 Y1.204
N848 X5.458 Y1.163
N849 X5.496 Y1.128
N850 X5.539 Y1.1
N851 X5.586 Y1.079
N852 X5.636 Y1.067
N853 X5.688 Y1.063
N854 X6.688
N855 X6.739 Y1.067
N856 X6.789 Y1.079
N857 X6.836 Y1.1
N858 X6.879 Y1.128
N859 X6.917 Y1.163
N860 X6.949 Y1.204
N861 X6.974 Y1.25
N862 X6.99 Y1.298
N863 X6.999 Y1.349
N864 Y1.401
N865 X6.99 Y1.452
N866 X6.974 Y1.501
N867 X6.949 Y1.546
N868 X6.917 Y1.587
N869 X6.879 Y1.622
N870 X6.836 Y1.65
N871 X6.789 Y1.671
N872 X6.739 Y1.683
N873 X6.688 Y1.688
N874 G0 Z0.25
N875 X5.669 Y1.435
N876 G1 Z0.412 F15.
N877 Z-0.338
N878 X5.665 Y1.433 Z-0.339
N879 X5.658 Y1.43 Z-0.342
N880 X5.652 Y1.426 Z-0.345
N881 X5.646 Y1.422 Z-0.347
N882 X5.641 Y1.416 Z-0.35
N883 X5.636 Y1.411 Z-0.353
N884 X5.632 Y1.404 Z-0.356
N885 X5.629 Y1.397 Z-0.358
N886 X5.627 Y1.39 Z-0.361
N887 X5.625 Y1.383 Z-0.364
N888 Y1.375 Z-0.367
N889 Y1.368 Z-0.369
N890 X5.627 Y1.36 Z-0.372
N891 X5.629 Y1.353 Z-0.375
N892 X5.632 Y1.346 Z-0.378
N893 X5.636 Y1.34 Z-0.38
N894 X5.641 Y1.334 Z-0.383
N895 X5.646 Y1.328 Z-0.386
N896 X5.652 Y1.324 Z-0.389
N897 X5.658 Y1.32 Z-0.391
N898 X5.665 Y1.317 Z-0.394
N899 X5.673 Y1.314 Z-0.397
N900 X5.68 Y1.313 Z-0.4
N901 X5.688 Z-0.402
N902 X6.688 Z-0.766
N903 X6.695 Z-0.769
N904 X6.702 Y1.314 Z-0.772
N905 X6.71 Y1.317 Z-0.775
N906 X6.717 Y1.32 Z-0.777
N907 X6.723 Y1.324 Z-0.78
N908 X6.729 Y1.328 Z-0.783
N909 X6.734 Y1.334 Z-0.786
N910 X6.739 Y1.34 Z-0.788
N911 X6.743 Y1.346 Z-0.791
N912 X6.746 Y1.353 Z-0.794
N913 X6.748 Y1.36 Z-0.796
N914 X6.75 Y1.368 Z-0.799
N915 Y1.375 Z-0.802
N916 Y1.383 Z-0.805
N917 X6.748 Y1.39 Z-0.807
N918 X6.746 Y1.397 Z-0.81
N919 X6.743 Y1.404 Z-0.813
N920 X6.739 Y1.411 Z-0.816
N921 X6.734 Y1.416 Z-0.818
N922 X6.729 Y1.422 Z-0.821
N923 X6.723 Y1.426 Z-0.824
N924 X6.717 Y1.43 Z-0.827
N925 X6.71 Y1.433 Z-0.829
N926 X6.702 Y1.436 Z-0.832
N927 X6.695 Y1.437 Z-0.835
N928 X6.688 Y1.438 Z-0.838
N929 X5.688
N930 X5.664 Y1.433
N931 X5.643 Y1.419
N932 X5.63 Y1.399
N933 X5.625 Y1.375
N934 X5.63 Y1.351
N935 X5.643 Y1.331
N936 X5.664 Y1.317
N937 X5.688 Y1.313
N938 X6.688
N939 X6.711 Y1.317
N940 X6.732 Y1.331
N941 X6.745 Y1.351
N942 X6.75 Y1.375
N943 X6.745 Y1.399
N944 X6.732 Y1.419
N945 X6.711 Y1.433
N946 X6.688 Y1.438
N947 Y1.688
N948 X5.688
N949 X5.636 Y1.683
N950 X5.586 Y1.671
N951 X5.539 Y1.65
N952 X5.496 Y1.622
N953 X5.458 Y1.587
N954 X5.426 Y1.546
N955 X5.401 Y1.501
N956 X5.385 Y1.452
N957 X5.376 Y1.401
N958 Y1.349
N959 X5.385 Y1.298
N960 X5.401 Y1.25
N961 X5.426 Y1.204
N962 X5.458 Y1.163
N963 X5.496 Y1.128
N964 X5.539 Y1.1
N965 X5.586 Y1.079
N966 X5.636 Y1.067
N967 X5.688 Y1.063
N968 X6.688
N969 X6.739 Y1.067
N970 X6.789 Y1.079
N971 X6.836 Y1.1
N972 X6.879 Y1.128
N973 X6.917 Y1.163
N974 X6.949 Y1.204
N975 X6.974 Y1.25
N976 X6.99 Y1.298
N977 X6.999 Y1.349
N978 Y1.401
N979 X6.99 Y1.452
N980 X6.974 Y1.501
N981 X6.949 Y1.546
N982 X6.917 Y1.587
N983 X6.879 Y1.622
N984 X6.836 Y1.65
N985 X6.789 Y1.671
N986 X6.739 Y1.683
N987 X6.688 Y1.688
N988 G0 Z0.25
N989 X5.669 Y1.435
N990 G1 Z0.319 F15.
N991 Z-0.431
N992 X5.665 Y1.433 Z-0.432
N993 X5.658 Y1.43 Z-0.435
N994 X5.652 Y1.426 Z-0.438
N995 X5.646 Y1.422 Z-0.44
N996 X5.641 Y1.416 Z-0.443
N997 X5.636 Y1.411 Z-0.446
N998 X5.632 Y1.404 Z-0.449
N999 X5.629 Y1.397 Z-0.451
N1000 X5.627 Y1.39 Z-0.454
N1001 X5.625 Y1.383 Z-0.457
N1002 Y1.375 Z-0.46
N1003 Y1.368 Z-0.462
N1004 X5.627 Y1.36 Z-0.465
N1005 X5.629 Y1.353 Z-0.468
N1006 X5.632 Y1.346 Z-0.471
N1007 X5.636 Y1.34 Z-0.473
N1008 X5.641 Y1.334 Z-0.476
N1009 X5.646 Y1.328 Z-0.479
N1010 X5.652 Y1.324 Z-0.482
N1011 X5.658 Y1.32 Z-0.484
N1012 X5.665 Y1.317 Z-0.487
N1013 X5.673 Y1.314 Z-0.49
N1014 X5.68 Y1.313 Z-0.493
N1015 X5.688 Z-0.495
N1016 X6.688 Z-0.859
N1017 X6.695 Z-0.862
N1018 X6.702 Y1.314 Z-0.865
N1019 X6.71 Y1.317 Z-0.868
N1020 X6.717 Y1.32 Z-0.87
N1021 X6.723 Y1.324 Z-0.873
N1022 X6.729 Y1.328 Z-0.876
N1023 X6.734 Y1.334 Z-0.879
N1024 X6.739 Y1.34 Z-0.881
N1025 X6.743 Y1.346 Z-0.884
N1026 X6.746 Y1.353 Z-0.887
N1027 X6.748 Y1.36 Z-0.89
N1028 X6.75 Y1.368 Z-0.892
N1029 Y1.375 Z-0.895
N1030 Y1.383 Z-0.898
N1031 X6.748 Y1.39 Z-0.901
N1032 X6.746 Y1.397 Z-0.903
N1033 X6.743 Y1.404 Z-0.906
N1034 X6.739 Y1.411 Z-0.909
N1035 X6.734 Y1.416 Z-0.912
N1036 X6.729 Y1.422 Z-0.914
N1037 X6.723 Y1.426 Z-0.917
N1038 X6.717 Y1.43 Z-0.92
N1039 X6.71 Y1.433 Z-0.923
N1040 X6.702 Y1.436 Z-0.925
N1041 X6.695 Y1.437 Z-0.928
N1042 X6.688 Y1.438 Z-0.931
N1043 X5.688
N1044 X5.664 Y1.433
N1045 X5.643 Y1.419
N1046 X5.63 Y1.399
N1047 X5.625 Y1.375
N1048 X5.63 Y1.351
N1049 X5.643 Y1.331
N1050 X5.664 Y1.317
N1051 X5.688 Y1.313
N1052 X6.688
N1053 X6.711 Y1.317
N1054 X6.732 Y1.331
N1055 X6.745 Y1.351
N1056 X6.75 Y1.375
N1057 X6.745 Y1.399
N1058 X6.732 Y1.419
N1059 X6.711 Y1.433
N1060 X6.688 Y1.438
N1061 Y1.688
N1062 X5.688
N1063 X5.636 Y1.683
N1064 X5.586 Y1.671
N1065 X5.539 Y1.65
N1066 X5.496 Y1.622
N1067 X5.458 Y1.587
N1068 X5.426 Y1.546
N1069 X5.401 Y1.501
N1070 X5.385 Y1.452
N1071 X5.376 Y1.401
N1072 Y1.349
N1073 X5.385 Y1.298
N1074 X5.401 Y1.25
N1075 X5.426 Y1.204
N1076 X5.458 Y1.163
N1077 X5.496 Y1.128
N1078 X5.539 Y1.1
N1079 X5.586 Y1.079
N1080 X5.636 Y1.067
N1081 X5.688 Y1.063
N1082 X6.688
N1083 X6.739 Y1.067
N1084 X6.789 Y1.079
N1085 X6.836 Y1.1
N1086 X6.879 Y1.128
N1087 X6.917 Y1.163
N1088 X6.949 Y1.204
N1089 X6.974 Y1.25
N1090 X6.99 Y1.298
N1091 X6.999 Y1.349
N1092 Y1.401
N1093 X6.99 Y1.452
N1094 X6.974 Y1.501
N1095 X6.949 Y1.546
N1096 X6.917 Y1.587
N1097 X6.879 Y1.622
N1098 X6.836 Y1.65
N1099 X6.789 Y1.671
N1100 X6.739 Y1.683
N1101 X6.688 Y1.688
N1102 G0 Z0.25
N1103 X5.669 Y1.435
N1104 G1 Z0.226 F15.
N1105 Z-0.524
N1106 X5.665 Y1.433 Z-0.525
N1107 X5.658 Y1.43 Z-0.528
N1108 X5.652 Y1.426 Z-0.531
N1109 X5.646 Y1.422 Z-0.534
N1110 X5.641 Y1.416 Z-0.536
N1111 X5.636 Y1.411 Z-0.539
N1112 X5.632 Y1.404 Z-0.542
N1113 X5.629 Y1.397 Z-0.545
N1114 X5.627 Y1.39 Z-0.547
N1115 X5.625 Y1.383 Z-0.55
N1116 Y1.375 Z-0.553
N1117 Y1.368 Z-0.556
N1118 X5.627 Y1.36 Z-0.558
N1119 X5.629 Y1.353 Z-0.561
N1120 X5.632 Y1.346 Z-0.564
N1121 X5.636 Y1.34 Z-0.566
N1122 X5.641 Y1.334 Z-0.569
N1123 X5.646 Y1.328 Z-0.572
N1124 X5.652 Y1.324 Z-0.575
N1125 X5.658 Y1.32 Z-0.577
N1126 X5.665 Y1.317 Z-0.58
N1127 X5.673 Y1.314 Z-0.583
N1128 X5.68 Y1.313 Z-0.586
N1129 X5.688 Z-0.588
N1130 X6.688 Z-0.952
N1131 X6.695 Z-0.955
N1132 X6.702 Y1.314 Z-0.958
N1133 X6.71 Y1.317 Z-0.961
N1134 X6.717 Y1.32 Z-0.963
N1135 X6.723 Y1.324 Z-0.966
N1136 X6.729 Y1.328 Z-0.969
N1137 X6.734 Y1.334 Z-0.972
N1138 X6.739 Y1.34 Z-0.974
N1139 X6.743 Y1.346 Z-0.977
N1140 X6.746 Y1.353 Z-0.98
N1141 X6.748 Y1.36 Z-0.983
N1142 X6.75 Y1.368 Z-0.985
N1143 Y1.375 Z-0.988
N1144 Y1.383 Z-0.991
N1145 X6.748 Y1.39 Z-0.994
N1146 X6.746 Y1.397 Z-0.996
N1147 X6.743 Y1.404 Z-0.999
N1148 X6.739 Y1.411 Z-1.002
N1149 X6.734 Y1.416 Z-1.005
N1150 X6.729 Y1.422 Z-1.007
N1151 X6.723 Y1.426 Z-1.01
N1152 X6.717 Y1.43 Z-1.013
N1153 X6.71 Y1.433 Z-1.016
N1154 X6.702 Y1.436 Z-1.018
N1155 X6.695 Y1.437 Z-1.021
N1156 X6.688 Y1.438 Z-1.024
N1157 X5.688
N1158 X5.664 Y1.433
N1159 X5.643 Y1.419
N1160 X5.63 Y1.399
N1161 X5.625 Y1.375
N1162 X5.63 Y1.351
N1163 X5.643 Y1.331
N1164 X5.664 Y1.317
N1165 X5.688 Y1.313
N1166 X6.688
N1167 X6.711 Y1.317
N1168 X6.732 Y1.331
N1169 X6.745 Y1.351
N1170 X6.75 Y1.375
N1171 X6.745 Y1.399
N1172 X6.732 Y1.419
N1173 X6.711 Y1.433
N1174 X6.688 Y1.438
N1175 Y1.688
N1176 X5.688
N1177 X5.636 Y1.683
N1178 X5.586 Y1.671
N1179 X5.539 Y1.65
N1180 X5.496 Y1.622
N1181 X5.458 Y1.587
N1182 X5.426 Y1.546
N1183 X5.401 Y1.501
N1184 X5.385 Y1.452
N1185 X5.376 Y1.401
N1186 Y1.349
N1187 X5.385 Y1.298
N1188 X5.401 Y1.25
N1189 X5.426 Y1.204
N1190 X5.458 Y1.163
N1191 X5.496 Y1.128
N1192 X5.539 Y1.1
N1193 X5.586 Y1.079
N1194 X5.636 Y1.067
N1195 X5.688 Y1.063
N1196 X6.688
N1197 X6.739 Y1.067
N1198 X6.789 Y1.079
N1199 X6.836 Y1.1
N1200 X6.879 Y1.128
N1201 X6.917 Y1.163
N1202 X6.949 Y1.204
N1203 X6.974 Y1.25
N1204 X6.99 Y1.298
N1205 X6.999 Y1.349
N1206 Y1.401
N1207 X6.99 Y1.452
N1208 X6.974 Y1.501
N1209 X6.949 Y1.546
N1210 X6.917 Y1.587
N1211 X6.879 Y1.622
N1212 X6.836 Y1.65
N1213 X6.789 Y1.671
N1214 X6.739 Y1.683
N1215 X6.688 Y1.688
N1216 G0 Z0.25
N1217 X5.669 Y1.435
N1218 G1 Z0.133 F15.
N1219 Z-0.617
N1220 X5.665 Y1.433 Z-0.618
N1221 X5.658 Y1.43 Z-0.621
N1222 X5.652 Y1.426 Z-0.624
N1223 X5.646 Y1.422 Z-0.627
N1224 X5.641 Y1.416 Z-0.629
N1225 X5.636 Y1.411 Z-0.632
N1226 X5.632 Y1.404 Z-0.635
N1227 X5.629 Y1.397 Z-0.638
N1228 X5.627 Y1.39 Z-0.64
N1229 X5.625 Y1.383 Z-0.643
N1230 Y1.375 Z-0.646
N1231 Y1.368 Z-0.649
N1232 X5.627 Y1.36 Z-0.651
N1233 X5.629 Y1.353 Z-0.654
N1234 X5.632 Y1.346 Z-0.657
N1235 X5.636 Y1.34 Z-0.66
N1236 X5.641 Y1.334 Z-0.662
N1237 X5.646 Y1.328 Z-0.665
N1238 X5.652 Y1.324 Z-0.668
N1239 X5.658 Y1.32 Z-0.671
N1240 X5.665 Y1.317 Z-0.673
N1241 X5.673 Y1.314 Z-0.676
N1242 X5.68 Y1.313 Z-0.679
N1243 X5.688 Z-0.682
N1244 X6.688 Z-1.046
N1245 X6.695 Z-1.048
N1246 X6.702 Y1.314 Z-1.051
N1247 X6.71 Y1.317 Z-1.054
N1248 X6.717 Y1.32 Z-1.056
N1249 X6.723 Y1.324 Z-1.059
N1250 X6.729 Y1.328 Z-1.062
N1251 X6.734 Y1.334 Z-1.065
N1252 X6.739 Y1.34 Z-1.067
N1253 X6.743 Y1.346 Z-1.07
N1254 X6.746 Y1.353 Z-1.073
N1255 X6.748 Y1.36 Z-1.076
N1256 X6.75 Y1.368 Z-1.078
N1257 Y1.375 Z-1.081
N1258 Y1.383 Z-1.084
N1259 X6.748 Y1.39 Z-1.087
N1260 X6.746 Y1.397 Z-1.089
N1261 X6.743 Y1.404 Z-1.092
N1262 X6.739 Y1.411 Z-1.095
N1263 X6.734 Y1.416 Z-1.098
N1264 X6.729 Y1.422 Z-1.1
N1265 X6.723 Y1.426 Z-1.103
N1266 X6.717 Y1.43 Z-1.106
N1267 X6.71 Y1.433 Z-1.109
N1268 X6.702 Y1.436 Z-1.111
N1269 X6.695 Y1.437 Z-1.114
N1270 X6.688 Y1.438 Z-1.117
N1271 X5.688
N1272 X5.664 Y1.433
N1273 X5.643 Y1.419
N1274 X5.63 Y1.399
N1275 X5.625 Y1.375
N1276 X5.63 Y1.351
N1277 X5.643 Y1.331
N1278 X5.664 Y1.317
N1279 X5.688 Y1.313
N1280 X6.688
N1281 X6.711 Y1.317
N1282 X6.732 Y1.331
N1283 X6.745 Y1.351
N1284 X6.75 Y1.375
N1285 X6.745 Y1.399
N1286 X6.732 Y1.419
N1287 X6.711 Y1.433
N1288 X6.688 Y1.438
N1289 Y1.688
N1290 X5.688
N1291 X5.636 Y1.683
N1292 X5.586 Y1.671
N1293 X5.539 Y1.65
N1294 X5.496 Y1.622
N1295 X5.458 Y1.587
N1296 X5.426 Y1.546
N1297 X5.401 Y1.501
N1298 X5.385 Y1.452
N1299 X5.376 Y1.401
N1300 Y1.349
N1301 X5.385 Y1.298
N1302 X5.401 Y1.25
N1303 X5.426 Y1.204
N1304 X5.458 Y1.163
N1305 X5.496 Y1.128
N1306 X5.539 Y1.1
N1307 X5.586 Y1.079
N1308 X5.636 Y1.067
N1309 X5.688 Y1.063
N1310 X6.688
N1311 X6.739 Y1.067
N1312 X6.789 Y1.079
N1313 X6.836 Y1.1
N1314 X6.879 Y1.128
N1315 X6.917 Y1.163
N1316 X6.949 Y1.204
N1317 X6.974 Y1.25
N1318 X6.99 Y1.298
N1319 X6.999 Y1.349
N1320 Y1.401
N1321 X6.99 Y1.452
N1322 X6.974 Y1.501
N1323 X6.949 Y1.546
N1324 X6.917 Y1.587
N1325 X6.879 Y1.622
N1326 X6.836 Y1.65
N1327 X6.789 Y1.671
N1328 X6.739 Y1.683
N1329 X6.688 Y1.688
N1330 G0 Z0.25
N1331 X5.669 Y1.435
N1332 G1 Z0.04 F15.
N1333 Z-0.71
N1334 X5.665 Y1.433 Z-0.711
N1335 X5.658 Y1.43 Z-0.714
N1336 X5.652 Y1.426 Z-0.717
N1337 X5.646 Y1.422 Z-0.72
N1338 X5.641 Y1.416 Z-0.722
N1339 X5.636 Y1.411 Z-0.725
N1340 X5.632 Y1.404 Z-0.728
N1341 X5.629 Y1.397 Z-0.731
N1342 X5.627 Y1.39 Z-0.733
N1343 X5.625 Y1.383 Z-0.736
N1344 Y1.375 Z-0.739
N1345 Y1.368 Z-0.742
N1346 X5.627 Y1.36 Z-0.744
N1347 X5.629 Y1.353 Z-0.747
N1348 X5.632 Y1.346 Z-0.75
N1349 X5.636 Y1.34 Z-0.753
N1350 X5.641 Y1.334 Z-0.755
N1351 X5.646 Y1.328 Z-0.758
N1352 X5.652 Y1.324 Z-0.761
N1353 X5.658 Y1.32 Z-0.764
N1354 X5.665 Y1.317 Z-0.766
N1355 X5.673 Y1.314 Z-0.769
N1356 X5.68 Y1.313 Z-0.772
N1357 X5.688 Z-0.775
N1358 X6.688 Z-1.139
N1359 X6.695 Z-1.141
N1360 X6.702 Y1.314 Z-1.144
N1361 X6.71 Y1.317 Z-1.147
N1362 X6.717 Y1.32 Z-1.15
N1363 X6.723 Y1.324 Z-1.152
N1364 X6.729 Y1.328 Z-1.155
N1365 X6.734 Y1.334 Z-1.158
N1366 X6.739 Y1.34 Z-1.161
N1367 X6.743 Y1.346 Z-1.163
N1368 X6.746 Y1.353 Z-1.166
N1369 X6.748 Y1.36 Z-1.169
N1370 X6.75 Y1.368 Z-1.172
N1371 Y1.375 Z-1.174
N1372 Y1.383 Z-1.177
N1373 X6.748 Y1.39 Z-1.18
N1374 X6.746 Y1.397 Z-1.183
N1375 X6.743 Y1.404 Z-1.185
N1376 X6.739 Y1.411 Z-1.188
N1377 X6.734 Y1.416 Z-1.191
N1378 X6.729 Y1.422 Z-1.194
N1379 X6.723 Y1.426 Z-1.196
N1380 X6.717 Y1.43 Z-1.199
N1381 X6.71 Y1.433 Z-1.202
N1382 X6.702 Y1.436 Z-1.205
N1383 X6.695 Y1.437 Z-1.207
N1384 X6.688 Y1.438 Z-1.21
N1385 X5.688
N1386 X5.664 Y1.433
N1387 X5.643 Y1.419
N1388 X5.63 Y1.399
N1389 X5.625 Y1.375
N1390 X5.63 Y1.351
N1391 X5.643 Y1.331
N1392 X5.664 Y1.317
N1393 X5.688 Y1.313
N1394 X6.688
N1395 X6.711 Y1.317
N1396 X6.732 Y1.331
N1397 X6.745 Y1.351
N1398 X6.75 Y1.375
N1399 X6.745 Y1.399
N1400 X6.732 Y1.419
N1401 X6.711 Y1.433
N1402 X6.688 Y1.438
N1403 Y1.688
N1404 X5.688
N1405 X5.636 Y1.683
N1406 X5.586 Y1.671
N1407 X5.539 Y1.65
N1408 X5.496 Y1.622
N1409 X5.458 Y1.587
N1410 X5.426 Y1.546
N1411 X5.401 Y1.501
N1412 X5.385 Y1.452
N1413 X5.376 Y1.401
N1414 Y1.349
N1415 X5.385 Y1.298
N1416 X5.401 Y1.25
N1417 X5.426 Y1.204
N1418 X5.458 Y1.163
N1419 X5.496 Y1.128
N1420 X5.539 Y1.1
N1421 X5.586 Y1.079
N1422 X5.636 Y1.067
N1423 X5.688 Y1.063
N1424 X6.688
N1425 X6.739 Y1.067
N1426 X6.789 Y1.079
N1427 X6.836 Y1.1
N1428 X6.879 Y1.128
N1429 X6.917 Y1.163
N1430 X6.949 Y1.204
N1431 X6.974 Y1.25
N1432 X6.99 Y1.298
N1433 X6.999 Y1.349
N1434 Y1.401
N1435 X6.99 Y1.452
N1436 X6.974 Y1.501
N1437 X6.949 Y1.546
N1438 X6.917 Y1.587
N1439 X6.879 Y1.622
N1440 X6.836 Y1.65
N1441 X6.789 Y1.671
N1442 X6.739 Y1.683
N1443 X6.688 Y1.688
N1444 G0 Z0.25
N1445 G40
N1446 M5
N1447 M9
N1448 G80
N1449 M30

[DareBee]

If you want VisualMill help - we need to see VisualMill part file and/or screen shots and a description of what you did and what your part looks like.
G-code is useless as all post processors are 100% customizable.

[lostpinky]

I thought you could back plot the Gcode and see what the tool path was doing. The problem is not in the drawing, it is somewhere in one of the boxes that I have to fill in when I am setting up the parameters. I have three screen captures showing each tab.

[Andre' B]

The first bit of code.

Note the use of the code tags, you get them by pushing the # in the message editor.

N1O001
N2 M25 G49
N3 G17 G40
N4 G20
N5 G80
N6 G90
N7 G98
N8 ;2 1/2 Axis Pocketing
N9 T1 M06
N10 G0 X5.941 Y1.313 S5000 M3
N11 G43 Z0.25 H1
N12 M9
N13 G1 X6.688 Z-0.022 F15.
N14 X6.695 Z-0.024
N15 X6.702 Y1.314 Z-0.027
N16 X6.71 Y1.317 Z-0.03
N17 X6.717 Y1.32 Z-0.033
N18 X6.723 Y1.324 Z-0.035
N19 X6.729 Y1.328 Z-0.038
N20 X6.734 Y1.334 Z-0.041
N21 X6.739 Y1.34 Z-0.044
N22 X6.743 Y1.346 Z-0.046
N23 X6.746 Y1.353 Z-0.049
N24 X6.748 Y1.36 Z-0.052
N25 X6.75 Y1.368 Z-0.055
N26 Y1.375 Z-0.057
N27 Y1.383 Z-0.06
N28 X6.748 Y1.39 Z-0.063
N29 X6.746 Y1.397 Z-0.066
N30 X6.743 Y1.404 Z-0.068
N31 X6.739 Y1.411 Z-0.071
N32 X6.734 Y1.416 Z-0.074
N33 X6.729 Y1.422 Z-0.077
N34 X6.723 Y1.426 Z-0.079
N35 X6.717 Y1.43 Z-0.082
N36 X6.71 Y1.433 Z-0.085
N37 X6.702 Y1.436 Z-0.088
N38 X6.695 Y1.437 Z-0.09
N39 X6.688 Y1.438 Z-0.093
N40 X5.688
N41 X5.664 Y1.433
N42 X5.643 Y1.419
N43 X5.63 Y1.399
N44 X5.625 Y1.375
N45 X5.63 Y1.351
N46 X5.643 Y1.331
N47 X5.664 Y1.317
N48 X5.688 Y1.313
N49 X6.688
N50 X6.711 Y1.317
N51 X6.732 Y1.331
N52 X6.745 Y1.351
N53 X6.75 Y1.375
N54 X6.745 Y1.399
N55 X6.732 Y1.419
N56 X6.711 Y1.433
N57 X6.688 Y1.438
N58 Y1.688
N59 X5.688
N60 X5.636 Y1.683
N61 X5.586 Y1.671
N62 X5.539 Y1.65
N63 X5.496 Y1.622
N64 X5.458 Y1.587
N65 X5.426 Y1.546
N66 X5.401 Y1.501
N67 X5.385 Y1.452
N68 X5.376 Y1.401
N69 Y1.349
N70 X5.385 Y1.298
N71 X5.401 Y1.25
N72 X5.426 Y1.204
N73 X5.458 Y1.163
N74 X5.496 Y1.128
N75 X5.539 Y1.1
N76 X5.586 Y1.079
N77 X5.636 Y1.067
N78 X5.688 Y1.063
N79 X6.688
N80 X6.739 Y1.067
N81 X6.789 Y1.079
N82 X6.836 Y1.1
N83 X6.879 Y1.128
N84 X6.917 Y1.163
N85 X6.949 Y1.204
N86 X6.974 Y1.25
N87 X6.99 Y1.298
N88 X6.999 Y1.349
N89 Y1.401
N90 X6.99 Y1.452
N91 X6.974 Y1.501
N92 X6.949 Y1.546
N93 X6.917 Y1.587
N94 X6.879 Y1.622
N95 X6.836 Y1.65
N96 X6.789 Y1.671
N97 X6.739 Y1.683
N98 X6.688 Y1.688
N99 G0 Z0.25

The yellow rampin line starts at Z0.250 and ends at Z-0.022 then it does the little arc down to the first level at Z-0.093
If you were using MasterCAM I would say your Z clearance is set too high, assuming the top of the part is Z0.000, I would try somthing about 0.005.

[lostpinky]

I have my clearance plane set at .250", part top at 0.00". The porblem is at line n101 where the tool lifts to 1.00" wasting a bunch of time.



N96 X6.789 Y1.671
N97 X6.739 Y1.683
N98 X6.688 Y1.688
N99 G0 Z0.25
N100 X5.685 Y1.313
N101 G1 Z1. F15.
N102 Z0.25
N103 X5.688 Z0.249
N104 X6.688 Z-0.115
N105 X6.695 Z-0.117
N106 X6.702 Y1.314 Z-0.12

[DareBee]

I thought you could back plot the Gcode and see what the tool path was doing. The problem is not in the drawing, it is somewhere in one of the boxes that I have to fill in when I am setting up the parameters. I have three screen captures showing each tab.

Back plotting code only gives what Andre has shown, it has NO idea what you have programmed.

I was thinking entry/exit or skim clearance settings, but they appear OK.

Best bet for us is if you attach the vcp file. This might be in your post processor as well.

What version and build release are you using?

BTW - I hate 2d pocketing MOP, especially for simple, single geometry. I always use profile instead. Maybe it is just my stupid head, but that is my preference

[lostpinky]

I am using VM 5.0,11,11 with a Centroid post. I agree that Andre has back plotted and shown the first lines of the code but the problem is in line 101, so if he or you could back plot a little past that, or just look at the Gcode itself you will see the Z1.0. I also prefer profiling to pocketing but the cutter will leave a small island in the middle of the pocket that can get grabbed by the cutter and might break the cutter when it get jammed up against the wall. I could not upload the VMP file because it is not an accepted file format so I uploaded it as a DXF. All I am doing it pocketing the inside to that oval with a .490" cutter that does not center cut.

[DareBee]

1) There is no dispute about the line 101. The point is that a back plot does absolutely nothing to show you/us where the programming issue is in VisualMill.

2) I cannot test your settings for you because I am on a different version and it would be pointless.

3) Contact support at MecSoft to see if: A) you have the current service pack.
B) Why it is doing that.

Have a nice day

BTW - I would easily profile that in VM6 with your cutter and the right tweaks, However I do not remember if VM5 had 3D entry available as VM6 pro does.

[tennsmith07]

why cant you just change your z height lower so it doesnt take as long

[lostpinky]

the problem tennsmith, if you look at line 193,307,420,534,648,763 they all have a return to clearance and all of them are different. If I were running a single part that was simple it would be OK, but sometimes I run programs that are over 300,000 lines of code and the return to clearance waist tons of time on those long ones.

Thanks again to all of you