- cnc and manual operation help
-
Registered
cnc and manual operation help
I have viper 200's connected to my servos on my bridgeport v2xt. I would like to have manual hand wheels on the x and y . Is it possible to just put a switch in between the drives and the motors to just cut power to the motors when I want to use them or is it a bad Idea. I figured I would ask to see if someone has experience with this. I would like to just have tactile feel when doing some quick skimming on a surface or other things. I would like to be able to use the encoder feedback like a dro . Any thoughts or ideas?
Similar Threads:
-
- cnc and manual operation help
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules