That is good to hear. I was finally getting ready to order some drives and saw nothing listed except the 60s. (I'm getting tire of the zero diagnostics Geckos).
I've run out of the current batch of Viper 200 pcb's but i will have a new Viper 250 available in september.
It will run my V4.0 firmware running on the pic 30f processor, which im now running on the Viper 60 and Step2linear.
The new drive will be able to run IGBT's as well for much higher voltage.
Also this summer has been extremely busy with cnc router sales which is great (as compared to last year which was very slow ), but cuts into the time i can spend on making drives over the summer. I think the economy is picking up for sure.
Larry K
Similar Threads:
That is good to hear. I was finally getting ready to order some drives and saw nothing listed except the 60s. (I'm getting tire of the zero diagnostics Geckos).
Bob La Londe
http://www.YumaBassMan.com
So how is it going with those new Viper Drives?
Bob La Londe
http://www.YumaBassMan.com