Need Help! Hurco M2 w/WestAmp, Convert to Mach 3

Results 1 to 2 of 2

Thread: Hurco M2 w/WestAmp, Convert to Mach 3

  1. #1
    Registered
    Join Date
    Mar 2015
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Hurco M2 w/WestAmp, Convert to Mach 3

    I've got a Hurco M2 w/ a WestAmp servo drive Model #: GG802 (A6533).

    I'd like to use the current linear encoders, servo motors and servo drive. Would the step2linear boards be a fit for this application?

    Thanks,

    Jim

    Similar Threads:
    Last edited by jimwaa; 03-19-2015 at 03:25 PM.


  2. #2
    Member
    Join Date
    Feb 2007
    Location
    canada
    Posts
    962
    Downloads
    0
    Uploads
    0

    Default Re: Hurco M2 w/WestAmp, Convert to Mach 3

    Yes they should work, but you will have to get an interface diagram for the linear encoder.

    Larry

    Manufacturer of CNC routers and Viper Servo Drives
    www.LarkenCNC.com and www.Viperservo.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hurco M2 w/WestAmp, Convert to Mach 3

Hurco M2 w/WestAmp, Convert to Mach 3