CNC SMT Pick and Place Mod Video - CNCzone.com-The Largest Machinist Community on the net!

originator · #1 11-08-2009, 11:41 PM

I build a software and system to attach to a CNC machine for placing SMT components on a product I am manufacturing. The project involves a GUI that runs on Mac or PC, which sends commands via USB to a Parallax Propeller processor board which drivers 3 steppers and a vacuum.

Thought some might enjoy. Hope you like it.

YouTube- CNC SMT Pick and Place mod

Best viewed in HD mode.

keebler303 · #2 11-18-2009, 12:44 AM

Noisy little bugger!

Nice work. I assume the camera is only for fun, not used by the software to recognize fiducials or anything? I would like to make something like this eventually. I think I would make some code to turn a pcb component file into gcode and run the machine with mach.

Also you might look for a "vacuum ejector" made by SMC on ebay. They generate a vacuum through a venturi using compressed air. Much less annoying than the vacuum pump running.

Matt

Eclipze · #3 12-30-2009, 04:41 PM

Does anyone know of any alternative software packages for pick and place?
I would love to use the pick and place data directly from Protel, or to have a teach function for setting up board loading.

keebler303 · #4 12-30-2009, 07:41 PM

Originally Posted by Eclipze

Does anyone know of any alternative software packages for pick and place?
I would love to use the pick and place data directly from Protel, or to have a teach function for setting up board loading.

The easiest to get working is probably mach3 for machine control. But you still need to have something to convert your pick and place data to gcode. I think any way you go, you will have to either spend some serious money on software, or make some of your own.

Matt

Eclipze · #5 12-30-2009, 09:46 PM

I haven't yet delved into the extents of what the Mach3 can be configured for, however it is something I'II be looking closely at. But if there is dedicated software for pick and place, it's likely to have more thought put into it than the effort I would initially put into a Mach3 version... and take a lot less time to setup!

beliefdrive · #6 01-24-2010, 03:26 AM

what is software control machine?

thanks

dandumit · #7 04-14-2010, 05:00 AM

would you please post some details about "Z" axis ? It has some kind of suspension ?

Regards,
Daniel

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SMD pick and place	ciccio	Printing, Scanners, Vinyl cutting and Plotters	194	01-19-2010 01:34 AM
pick & place machine	gombault	LinuxCNC (formerly EMC2)	6	09-19-2009 02:19 AM
pick & place software	gombault	Digitizing and Laser Digitizing	0	09-06-2009 06:53 AM
Newbie- who has smd pick place software???	C++	Printing, Scanners, Vinyl cutting and Plotters	2	03-04-2009 02:43 PM
Pick-and-place using a CNC mill	mickelsen	CNC Tooling	2	12-23-2007 08:02 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)