CNC Tutorial Videos for Newbies

[ivanirons]

Hello All,

I have been working on a video tutorial series for taking raster images
and converting them to vector and then into a DXF File. It will be
another couple of weeks before they get released on the site. They
will be free to all.

I have also done a few other CNC Basics, SheetCAM and Rhino Video
tutorials if you are interested. I hope to do more as time permits.

http://cncinformation.com/cnc-ecours...-basics-video/

http://cncinformation.com/cad-videos/

http://cncinformation.com/cam-videos/

I am trying to do a CNC walk through for newbies to get comfortable. I
am not an expert user but can cover the basics.

I am open to any and all feedback. Also, let me know if you want to
see other processes, softwares, etc. I will put them in the video
queue.

Ivan Irons
http://www.cncinformation.com

[cnc metalcraft]

thank good videos

[MonoNeuron]

You've put some good stuff together here, Ivan. I'll be sending the link to my mates who are getting interested in this stuff.
Rich.

[DougO]

Thanks Ivan. I need all the help I can get.

Doug

[kamalendra]

good idea keep it upit will be helpfull to biginners like me


kamal

[anurak]

I can not see video. The site is temporarity unavilable.

[eng_semsem1980]

I can not see video. The site is temporarily unavailable.

[chaterlea25]

Hi
The links do not appear to be working?
Regards
John

[Noodles87]

All links are working fine for me. And when this was first posted. Not sure whats wrong. Be sure to scroll down and choose which video to watch.

[psylux]

cool thx

[blackbeard52]

probably the reason some users are not able to view videos is they have some knid of spam or firewall software installed and configured to block.... disable these during the time you want to view them and re-enable them after or configure it properly.... the videos are fine a working well.... Thanks Ivan for your contribution.....

Bob

[natedog122]

im doing cnc at my school and my teacher has no clue how to run programs or use the machine
i pretty much learned through mastercam tutorials online to help me but im really stuck on engraving toolpaths and i cant find help online anywhere
does anyone know where i could find some videos or tips so i can get it down