I found a good deal for a 5' x 12' Multicam CNC router on Ebay. I have spent the last two weeks completely gutting it and retrofitting it. It had stepper motors and was pretty slow and noisy. I replaced the drive system with clearpath servo motors controlled by UCCNC software with the UC300ETH controller. Here is a quick video of the first test using g-code and air cutting some circles. So far so good. I still have a few things to finish on it like the homing function and spindle control. This video shows how much faster and quieter it is now. I will be posting more on this as I get toward the finish line.



Similar Threads: