- Abrasive Blasting With Small (5CFM) Air Compressor
-
Member
Abrasive Blasting With Small (5CFM) Air Compressor
For an easy way to improve the appearance of machined surfaces, consider bead blasting. It has little impact on the dimensions of the surfaces, but large blasting cabinets consume lots of air. If you have a small compressor (5CFM or so) blasting is still possible using a bench top cabinet with some improvements. I would like to share a video the improvements that I made. I really enjoy abrasive blasting both for clearing crude off old parts and for creating a matte finish on nearly machined parts.
If you have suggestions please let me know. Best wishes, Kent
Similar Threads:
-
- Abrasive Blasting With Small (5CFM) Air Compressor
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules