Calendar Trade Shows
PLC Training Workshop - Atlanta - takes place 08-20-2013 to 08-22-2013 08:00 AM to 04:30 PM
Learn PLC best practices, how to work with PLC safely and reliability and how to write a proper PLC program in this 3 day hands-on training. This is not just some presentation or using simulation software, this is hands-on with real equipment and real evaluations of your skill. See RSLogix PLC Training Seminar - SLC500, PLC5, Micrologix
Hands-On PLC Training Workshop (PLC: Programmable Logic Controllers). Start with basics move on to troubleshooting, then learn the foundations of good PLC programming while writing your first IEC-1131 compliant PLC program. (1.6 CEU)
This one is in Atlanta, see our site for St. Louis schedule too. This one across from Stone Mountain Resort.
Thousands to millions could be lost by one little PLC in an electrical panel that you never even knew existed. But most importantly, damage to machine and personnel could result from improper training and management of your company's PLCs. Our PLC training reduces those company risks for you.
You will receive extensive hands-on training with the lap top using RS Logix and your pick of the PLC5, or a SLC500 or a Micrologix PLC. Each individual is assigned a laptop and PLC to get hands-on experience all 3 days.
If you would like to learn how to reduce downtime thru PLC training, please sign up immediately for our 3 day workshop in Saint Louis. (As there is limited seating and these fill up quickly.)