LinkBack URL
About LinkBacks
You need to check your link. I got a 'channel not available' message.
| | |
Just a short video of an aluminum wheel spacer being machined.
The first tool is a standard HSS drill @20IPM feedrate. The second tool is a 3 flute carbide drill running 6000RPM @ 70IPM. The third tool is a Garr end mill roughing the slots, 7500RPM 100.IPM.
[nomedia="http://www.youtube.com/watch?v=MxRWHQVHtuY"]YouTube - ‪Carbide Drill‬‏[/nomedia]
Last edited by dylskee; 06-12-2011 at 08:42 PM. Reason: Fixed Broken Link
You need to check your link. I got a 'channel not available' message.
Sorry about that, fixed link.Originally Posted by jharvey407
Posting Permissions
| | |
