Stainless Steel Engraving

[CNC602]

Engraving on a stainless Steel Elevator Control Panel.
I'm using a UNIST Mister and a NSK High Frequency Spindle.
The CNC machine is a 2550 CNC Router from Vision Engraving & Routing Systems.

Click below to watch the
[nomedia="http://www.youtube.com/watch?v=z2On5oxYL8c"]YouTube - Engraving On Stainless Steel With a Vision 2550 CNC Router[/nomedia]

[MCR-B II]

It is very good. But not complete.
Again it is good work