Something Wrong with my cutting!

[SpeedsCustom]

Hello everyone, I just purchased VcarvePro and I wanted too test out one of my little drawings I had made.

So i designed this small pattern in ProCarve, no more then 15mm long/wide with some cornered edges. I set everything up, previewed the toolpath, was satisfied with how it cut in the preview and decided to save the format as a Sherline NGC to run on my Taig Machine running EMC.

Well, I imported the code and look great on the screen, I went ahead and previewed the cut on the screen, ok.

And the final results were not what I wanted. I was making a profile cut, and what I got was it going to one point, cutting my pattern, moving to an end point and cutting the pattern but not on top of each other.

So for example, instead of having a cut like this ( and going 3mm down it would go like this
(
(
(
Three separate cuts, I just want too simply profile something.

Why? It scared me because my machine almost started too cut my vise. I thought the preview would do as the machine told it too? Why is it telling it different???


I'm a little worried here.



-Jason

[ger21]

Can you post both the code and the Vcarve file?

[SpeedsCustom]

You guys needs to try and help me, I'm really worried. I hope I dind't buy the program and won't even be able to cut parts

Here is what the toolpath showed.

Great, thats what I wanted. But I didn't get that. I got that, or part of that all over the place It would start cutting finish and start making the same cut on the point is just ended.

Lol, this is going too be really long.

N20 G00 Z 3.176
N30 G00 X 0.000 Y 0.000
N40 G00 X -57.022 Y 11.549 Z 3.175
N50 G01 Z -0.500 F228.6
N60 G01 X -54.298 Y 10.852 F304.8
N70 X -53.902 Y 10.720
N80 X -53.507 Y 10.580
N90 X -53.116 Y 10.434
N100 X -52.727 Y 10.279
N110 X -52.342 Y 10.118
N120 X -51.959 Y 9.949
N130 X -51.580 Y 9.773
N140 X -49.244 Y 7.994
N150 X -49.161 Y 7.916
N160 X -49.073 Y 7.843
N170 X -48.980 Y 7.774
N180 X -48.883 Y 7.711
N190 X -48.781 Y 7.653
N200 X -48.676 Y 7.602
N210 X -48.567 Y 7.557
N220 X -48.457 Y 7.519
N230 X -48.344 Y 7.488
N240 X -48.230 Y 7.464
N250 X -48.116 Y 7.447
N260 X -48.002 Y 7.436
N270 X -47.889 Y 7.433
N280 X -47.724
N290 X -47.588 Y 7.436
N300 X -47.449 Y 7.446
N310 X -47.308 Y 7.463
N320 X -47.166 Y 7.488
N330 X -47.023 Y 7.520
N340 X -46.880 Y 7.560
N350 X -46.738 Y 7.608
N360 X -46.596 Y 7.664
N370 X -46.456 Y 7.728
N380 X -46.319 Y 7.800
N390 X -46.185 Y 7.880
N400 X -46.054 Y 7.968
N410 X -45.928 Y 8.063
N420 X -45.808 Y 8.166
N430 X -45.692 Y 8.275
N440 X -45.583 Y 8.390
N450 X -45.481 Y 8.511
N460 X -45.386 Y 8.637
N470 X -45.298 Y 8.767
N480 X -45.218 Y 8.901
N490 X -45.146 Y 9.039
N500 X -45.081 Y 9.178
N510 X -45.025 Y 9.320
N520 X -44.977 Y 9.462
N530 X -44.938 Y 9.605
N540 X -44.905 Y 9.748
N550 X -44.881 Y 9.890
N560 X -44.864 Y 10.031
N570 X -44.854 Y 10.170
N580 X -44.851 Y 10.307
N590 Y 16.055
N600 G00 Z 3.175
N610 G00 X -57.022 Y 11.549
N620 G01 Z -1.000 F228.6
N630 G01 X -54.298 Y 10.852 F304.8
N640 X -53.902 Y 10.720
N650 X -53.507 Y 10.580
N660 X -53.116 Y 10.434
N670 X -52.727 Y 10.279
N680 X -52.342 Y 10.118
N690 X -51.959 Y 9.949
N700 X -51.580 Y 9.773
N710 X -49.244 Y 7.994
N720 X -49.161 Y 7.916
N730 X -49.073 Y 7.843
N740 X -48.980 Y 7.774
N750 X -48.883 Y 7.711
N760 X -48.781 Y 7.653
N770 X -48.676 Y 7.602
N780 X -48.567 Y 7.557
N790 X -48.457 Y 7.519
N800 X -48.344 Y 7.488
N810 X -48.230 Y 7.464
N820 X -48.116 Y 7.447
N830 X -48.002 Y 7.436
N840 X -47.889 Y 7.433
N850 X -47.724
N860 X -47.588 Y 7.436
N870 X -47.449 Y 7.446
N880 X -47.308 Y 7.463
N890 X -47.166 Y 7.488
N900 X -47.023 Y 7.520
N910 X -46.880 Y 7.560
N920 X -46.738 Y 7.608
N930 X -46.596 Y 7.664
N940 X -46.456 Y 7.728
N950 X -46.319 Y 7.800
N960 X -46.185 Y 7.880
N970 X -46.054 Y 7.968
N980 X -45.928 Y 8.063
N990 X -45.808 Y 8.166
N1000 X -45.692 Y 8.275
N1010 X -45.583 Y 8.390
N1020 X -45.481 Y 8.511
N1030 X -45.386 Y 8.637
N1040 X -45.298 Y 8.767
N1050 X -45.218 Y 8.901
N1060 X -45.146 Y 9.039
N1070 X -45.081 Y 9.178
N1080 X -45.025 Y 9.320
N1090 X -44.977 Y 9.462
N1100 X -44.938 Y 9.605
N1110 X -44.905 Y 9.748
N1120 X -44.881 Y 9.890
N1130 X -44.864 Y 10.031
N1140 X -44.854 Y 10.170
N1150 X -44.851 Y 10.307
N1160 Y 16.055
N1170 G00 Z 3.175
N1180 G00 X -57.022 Y 11.549
N1190 G01 Z -1.500 F228.6
N1200 G01 X -54.298 Y 10.852 F304.8
N1210 X -53.902 Y 10.720
N1220 X -53.507 Y 10.580
N1230 X -53.116 Y 10.434
N1240 X -52.727 Y 10.279
N1250 X -52.342 Y 10.118
N1260 X -51.959 Y 9.949
N1270 X -51.580 Y 9.773
N1280 X -49.244 Y 7.994
N1290 X -49.161 Y 7.916
N1300 X -49.073 Y 7.843
N1310 X -48.980 Y 7.774
N1320 X -48.883 Y 7.711
N1330 X -48.781 Y 7.653
N1340 X -48.676 Y 7.602
N1350 X -48.567 Y 7.557
N1360 X -48.457 Y 7.519
N1370 X -48.344 Y 7.488
N1380 X -48.230 Y 7.464
N1390 X -48.116 Y 7.447
N1400 X -48.002 Y 7.436
N1410 X -47.889 Y 7.433
N1420 X -47.724
N1430 X -47.588 Y 7.436
N1440 X -47.449 Y 7.446
N1450 X -47.308 Y 7.463
N1460 X -47.166 Y 7.488
N1470 X -47.023 Y 7.520
N1480 X -46.880 Y 7.560
N1490 X -46.738 Y 7.608
N1500 X -46.596 Y 7.664
N1510 X -46.456 Y 7.728
N1520 X -46.319 Y 7.800
N1530 X -46.185 Y 7.880
N1540 X -46.054 Y 7.968
N1550 X -45.928 Y 8.063
N1560 X -45.808 Y 8.166
N1570 X -45.692 Y 8.275
N1580 X -45.583 Y 8.390
N1590 X -45.481 Y 8.511
N1600 X -45.386 Y 8.637
N1610 X -45.298 Y 8.767
N1620 X -45.218 Y 8.901
N1630 X -45.146 Y 9.039
N1640 X -45.081 Y 9.178
N1650 X -45.025 Y 9.320
N1660 X -44.977 Y 9.462
N1670 X -44.938 Y 9.605
N1680 X -44.905 Y 9.748
N1690 X -44.881 Y 9.890
N1700 X -44.864 Y 10.031
N1710 X -44.854 Y 10.170
N1720 X -44.851 Y 10.307
N1730 Y 16.055
N1740 G00 Z 3.175
N1750 G00 X -57.022 Y 11.549
N1760 G01 Z -2.000 F228.6
N1770 G01 X -54.298 Y 10.852 F304.8
N1780 X -53.902 Y 10.720
N1790 X -53.507 Y 10.580
N1800 X -53.116 Y 10.434
N1810 X -52.727 Y 10.279
N1820 X -52.342 Y 10.118
N1830 X -51.959 Y 9.949
N1840 X -51.580 Y 9.773
N1850 X -49.244 Y 7.994
N1860 X -49.161 Y 7.916
N1870 X -49.073 Y 7.843
N1880 X -48.980 Y 7.774
N1890 X -48.883 Y 7.711
N1900 X -48.781 Y 7.653
N1910 X -48.676 Y 7.602
N1920 X -48.567 Y 7.557
N1930 X -48.457 Y 7.519
N1940 X -48.344 Y 7.488
N1950 X -48.230 Y 7.464
N1960 X -48.116 Y 7.447
N1970 X -48.002 Y 7.436
N1980 X -47.889 Y 7.433
N1990 X -47.724
N2000 X -47.588 Y 7.436
N2010 X -47.449 Y 7.446
N2020 X -47.308 Y 7.463
N2030 X -47.166 Y 7.488
N2040 X -47.023 Y 7.520
N2050 X -46.880 Y 7.560
N2060 X -46.738 Y 7.608
N2070 X -46.596 Y 7.664
N2080 X -46.456 Y 7.728
N2090 X -46.319 Y 7.800
N2100 X -46.185 Y 7.880
N2110 X -46.054 Y 7.968
N2120 X -45.928 Y 8.063
N2130 X -45.808 Y 8.166
N2140 X -45.692 Y 8.275
N2150 X -45.583 Y 8.390
N2160 X -45.481 Y 8.511
N2170 X -45.386 Y 8.637
N2180 X -45.298 Y 8.767
N2190 X -45.218 Y 8.901
N2200 X -45.146 Y 9.039
N2210 X -45.081 Y 9.178
N2220 X -45.025 Y 9.320
N2230 X -44.977 Y 9.462
N2240 X -44.938 Y 9.605
N2250 X -44.905 Y 9.748
N2260 X -44.881 Y 9.890
N2270 X -44.864 Y 10.031
N2280 X -44.854 Y 10.170
N2290 X -44.851 Y 10.307
N2300 Y 16.055
N2310 G00 Z 3.175
N2320 G00 X -57.022 Y 11.549
N2330 G01 Z -2.500 F228.6
N2340 G01 X -54.298 Y 10.852 F304.8
N2350 X -53.902 Y 10.720
N2360 X -53.507 Y 10.580
N2370 X -53.116 Y 10.434
N2380 X -52.727 Y 10.279
N2390 X -52.342 Y 10.118
N2400 X -51.959 Y 9.949
N2410 X -51.580 Y 9.773
N2420 X -49.244 Y 7.994
N2430 X -49.161 Y 7.916
N2440 X -49.073 Y 7.843
N2450 X -48.980 Y 7.774
N2460 X -48.883 Y 7.711
N2470 X -48.781 Y 7.653
N2480 X -48.676 Y 7.602
N2490 X -48.567 Y 7.557
N2500 X -48.457 Y 7.519
N2510 X -48.344 Y 7.488
N2520 X -48.230 Y 7.464
N2530 X -48.116 Y 7.447
N2540 X -48.002 Y 7.436
N2550 X -47.889 Y 7.433
N2560 X -47.724
N2570 X -47.588 Y 7.436
N2580 X -47.449 Y 7.446
N2590 X -47.308 Y 7.463
N2600 X -47.166 Y 7.488
N2610 X -47.023 Y 7.520
N2620 X -46.880 Y 7.560
N2630 X -46.738 Y 7.608
N2640 X -46.596 Y 7.664
N2650 X -46.456 Y 7.728
N2660 X -46.319 Y 7.800
N2670 X -46.185 Y 7.880
N2680 X -46.054 Y 7.968
N2690 X -45.928 Y 8.063
N2700 X -45.808 Y 8.166
N2710 X -45.692 Y 8.275
N2720 X -45.583 Y 8.390
N2730 X -45.481 Y 8.511
N2740 X -45.386 Y 8.637
N2750 X -45.298 Y 8.767
N2760 X -45.218 Y 8.901
N2770 X -45.146 Y 9.039
N2780 X -45.081 Y 9.178
N2790 X -45.025 Y 9.320
N2800 X -44.977 Y 9.462
N2810 X -44.938 Y 9.605
N2820 X -44.905 Y 9.748
N2830 X -44.881 Y 9.890
N2840 X -44.864 Y 10.031
N2850 X -44.854 Y 10.170
N2860 X -44.851 Y 10.307
N2870 Y 16.055
N2880 G00 Z 3.175
N2890 G00 X -57.022 Y 11.549
N2900 G01 Z -3.000 F228.6
N2910 G01 X -54.298 Y 10.852 F304.8
N2920 X -53.902 Y 10.720
N2930 X -53.507 Y 10.580
N2940 X -53.116 Y 10.434
N2950 X -52.727 Y 10.279
N2960 X -52.342 Y 10.118
N2970 X -51.959 Y 9.949
N2980 X -51.580 Y 9.773
N2990 X -49.244 Y 7.994
N3000 X -49.161 Y 7.916
N3010 X -49.073 Y 7.843
N3020 X -48.980 Y 7.774
N3030 X -48.883 Y 7.711
N3040 X -48.781 Y 7.653
N3050 X -48.676 Y 7.602
N3060 X -48.567 Y 7.557
N3070 X -48.457 Y 7.519
N3080 X -48.344 Y 7.488
N3090 X -48.230 Y 7.464
N3100 X -48.116 Y 7.447
N3110 X -48.002 Y 7.436
N3120 X -47.889 Y 7.433
N3130 X -47.724
N3140 X -47.588 Y 7.436
N3150 X -47.449 Y 7.446
N3160 X -47.308 Y 7.463
N3170 X -47.166 Y 7.488
N3180 X -47.023 Y 7.520
N3190 X -46.880 Y 7.560
N3200 X -46.738 Y 7.608
N3210 X -46.596 Y 7.664
N3220 X -46.456 Y 7.728
N3230 X -46.319 Y 7.800
N3240 X -46.185 Y 7.880
N3250 X -46.054 Y 7.968
N3260 X -45.928 Y 8.063
N3270 X -45.808 Y 8.166
N3280 X -45.692 Y 8.275
N3290 X -45.583 Y 8.390
N3300 X -45.481 Y 8.511
N3310 X -45.386 Y 8.637
N3320 X -45.298 Y 8.767
N3330 X -45.218 Y 8.901
N3340 X -45.146 Y 9.039
N3350 X -45.081 Y 9.178
N3360 X -45.025 Y 9.320
N3370 X -44.977 Y 9.462
N3380 X -44.938 Y 9.605
N3390 X -44.905 Y 9.748
N3400 X -44.881 Y 9.890
N3410 X -44.864 Y 10.031
N3420 X -44.854 Y 10.170
N3430 X -44.851 Y 10.307
N3440 Y 16.055
N3450 G00 Z 3.175
N3460 G00 X -57.747 Y 11.765
N3470 G01 Z -0.500 F228.6
N3480 G01 X -57.909 Y 11.781 F304.8
N3490 X -58.074 Y 11.803
N3500 X -58.240 Y 11.832
N3510 X -58.407 Y 11.869
N3520 X -58.574 Y 11.912
N3530 X -58.742 Y 11.963
N3540 X -58.909 Y 12.022
N3550 X -59.075 Y 12.088
N3560 X -59.241 Y 12.162
N3570 X -59.404 Y 12.244
N3580 X -59.565 Y 12.333
N3590 X -59.723 Y 12.431
N3600 X -59.877 Y 12.535
N3610 X -60.028 Y 12.647
N3620 X -60.174 Y 12.766
N3630 X -60.316 Y 12.892
N3640 X -60.451 Y 13.024
N3650 X -60.581 Y 13.163
N3660 X -60.705 Y 13.307
N3670 X -60.822 Y 13.457
N3680 X -60.932 Y 13.611
N3690 X -61.035 Y 13.770
N3700 X -61.130 Y 13.933
N3710 X -61.218 Y 14.099
N3720 X -61.298 Y 14.267
N3730 X -61.370 Y 14.438
N3740 X -61.434 Y 14.611
N3750 X -61.490 Y 14.785
N3760 X -61.538 Y 14.959
N3770 X -61.578 Y 15.134
N3780 X -61.610 Y 15.308
N3790 X -61.635 Y 15.482
N3800 X -61.653 Y 15.654
N3810 X -61.663 Y 15.824
N3820 X -61.666 Y 15.993
N3830 X -61.663 Y 16.159
N3840 X -61.654 Y 16.322
N3850 X -61.651 Y 16.495
N3860 X -61.641 Y 16.671
N3870 X -61.624 Y 16.848
N3880 X -61.600 Y 17.027
N3890 X -61.568 Y 17.208
N3900 X -61.529 Y 17.389
N3910 X -61.482 Y 17.570
N3920 X -61.427 Y 17.751
N3930 X -61.364 Y 17.932
N3940 X -61.293 Y 18.112
N3950 X -61.214 Y 18.290
N3960 X -61.127 Y 18.465
N3970 X -61.031 Y 18.638
N3980 X -60.928 Y 18.808
N3990 X -60.817 Y 18.973
N4000 X -60.699 Y 19.135
N4010 X -60.573 Y 19.291
N4020 X -60.440 Y 19.443
N4030 X -60.301 Y 19.588
N4040 X -60.156 Y 19.727
N4050 X -60.004 Y 19.860
N4060 X -59.848 Y 19.986
N4070 X -59.686 Y 20.104
N4080 X -59.521 Y 20.215
N4090 X -59.351 Y 20.318
N4100 X -59.178 Y 20.414
N4110 X -59.003 Y 20.501
N4120 X -58.825 Y 20.580
N4130 X -58.645 Y 20.651
N4140 X -58.465 Y 20.714
N4150 X -58.283 Y 20.769
N4160 X -58.102 Y 20.816
N4170 X -57.921 Y 20.855
N4180 X -57.740 Y 20.887
N4190 X -57.561 Y 20.911
N4200 X -57.384 Y 20.928
N4210 X -57.208 Y 20.938
N4220 X -57.035 Y 20.941
N4230 G00 Z 3.175
N4240 G00 X -57.747 Y 11.765
N4250 G01 Z -1.000 F228.6
N4260 G01 X -57.909 Y 11.781 F304.8
N4270 X -58.074 Y 11.803
N4280 X -58.240 Y 11.832
N4290 X -58.407 Y 11.869
N4300 X -58.574 Y 11.912
N4310 X -58.742 Y 11.963
N4320 X -58.909 Y 12.022
N4330 X -59.075 Y 12.088
N4340 X -59.241 Y 12.162
N4350 X -59.404 Y 12.244
N4360 X -59.565 Y 12.333
N4370 X -59.723 Y 12.431
N4380 X -59.877 Y 12.535
N4390 X -60.028 Y 12.647
N4400 X -60.174 Y 12.766
N4410 X -60.316 Y 12.892
N4420 X -60.451 Y 13.024
N4430 X -60.581 Y 13.163
N4440 X -60.705 Y 13.307
N4450 X -60.822 Y 13.457
N4460 X -60.932 Y 13.611
N4470 X -61.035 Y 13.770
N4480 X -61.130 Y 13.933
N4490 X -61.218 Y 14.099
N4500 X -61.298 Y 14.267
N4510 X -61.370 Y 14.438
N4520 X -61.434 Y 14.611
N4530 X -61.490 Y 14.785
N4540 X -61.538 Y 14.959
N4550 X -61.578 Y 15.134
N4560 X -61.610 Y 15.308
N4570 X -61.635 Y 15.482
N4580 X -61.653 Y 15.654
N4590 X -61.663 Y 15.824
N4600 X -61.666 Y 15.993
N4610 X -61.663 Y 16.159
N4620 X -61.654 Y 16.322
N4630 X -61.651 Y 16.495
N4640 X -61.641 Y 16.671
N4650 X -61.624 Y 16.848
N4660 X -61.600 Y 17.027
N4670 X -61.568 Y 17.208
N4680 X -61.529 Y 17.389
N4690 X -61.482 Y 17.570
N4700 X -61.427 Y 17.751
N4710 X -61.364 Y 17.932
N4720 X -61.293 Y 18.112
N4730 X -61.214 Y 18.290
N4740 X -61.127 Y 18.465
N4750 X -61.031 Y 18.638
N4760 X -60.928 Y 18.808
N4770 X -60.817 Y 18.973
N4780 X -60.699 Y 19.135
N4790 X -60.573 Y 19.291
N4800 X -60.440 Y 19.443
N4810 X -60.301 Y 19.588
N4820 X -60.156 Y 19.727
N4830 X -60.004 Y 19.860
N4840 X -59.848 Y 19.986
N4850 X -59.686 Y 20.104
N4860 X -59.521 Y 20.215
N4870 X -59.351 Y 20.318
N4880 X -59.178 Y 20.414
N4890 X -59.003 Y 20.501
N4900 X -58.825 Y 20.580
N4910 X -58.645 Y 20.651
N4920 X -58.465 Y 20.714
N4930 X -58.283 Y 20.769
N4940 X -58.102 Y 20.816
N4950 X -57.921 Y 20.855
N4960 X -57.740 Y 20.887
N4970 X -57.561 Y 20.911
N4980 X -57.384 Y 20.928
N4990 X -57.208 Y 20.938
N5000 X -57.035 Y 20.941
N5010 G00 Z 3.175
N5020 G00 X -57.747 Y 11.765
N5030 G01 Z -1.500 F228.6
N5040 G01 X -57.909 Y 11.781 F304.8
N5050 X -58.074 Y 11.803
N5060 X -58.240 Y 11.832
N5070 X -58.407 Y 11.869
N5080 X -58.574 Y 11.912
N5090 X -58.742 Y 11.963
N5100 X -58.909 Y 12.022
N5110 X -59.075 Y 12.088
N5120 X -59.241 Y 12.162
N5130 X -59.404 Y 12.244
N5140 X -59.565 Y 12.333
N5150 X -59.723 Y 12.431
N5160 X -59.877 Y 12.535
N5170 X -60.028 Y 12.647
N5180 X -60.174 Y 12.766
N5190 X -60.316 Y 12.892
N5200 X -60.451 Y 13.024
N5210 X -60.581 Y 13.163
N5220 X -60.705 Y 13.307
N5230 X -60.822 Y 13.457
N5240 X -60.932 Y 13.611
N5250 X -61.035 Y 13.770
N5260 X -61.130 Y 13.933
N5270 X -61.218 Y 14.099
N5280 X -61.298 Y 14.267
N5290 X -61.370 Y 14.438
N5300 X -61.434 Y 14.611
N5310 X -61.490 Y 14.785
N5320 X -61.538 Y 14.959
N5330 X -61.578 Y 15.134
N5340 X -61.610 Y 15.308
N5350 X -61.635 Y 15.482
N5360 X -61.653 Y 15.654
N5370 X -61.663 Y 15.824
N5380 X -61.666 Y 15.993
N5390 X -61.663 Y 16.159
N5400 X -61.654 Y 16.322
N5410 X -61.651 Y 16.495
N5420 X -61.641 Y 16.671
N5430 X -61.624 Y 16.848
N5440 X -61.600 Y 17.027
N5450 X -61.568 Y 17.208
N5460 X -61.529 Y 17.389
N5470 X -61.482 Y 17.570
N5480 X -61.427 Y 17.751
N5490 X -61.364 Y 17.932
N5500 X -61.293 Y 18.112
N5510 X -61.214 Y 18.290
N5520 X -61.127 Y 18.465
N5530 X -61.031 Y 18.638
N5540 X -60.928 Y 18.808
N5550 X -60.817 Y 18.973
N5560 X -60.699 Y 19.135
N5570 X -60.573 Y 19.291
N5580 X -60.440 Y 19.443
N5590 X -60.301 Y 19.588
N5600 X -60.156 Y 19.727
N5610 X -60.004 Y 19.860
N5620 X -59.848 Y 19.986
N5630 X -59.686 Y 20.104
N5640 X -59.521 Y 20.215
N5650 X -59.351 Y 20.318
N5660 X -59.178 Y 20.414
N5670 X -59.003 Y 20.501
N5680 X -58.825 Y 20.580
N5690 X -58.645 Y 20.651
N5700 X -58.465 Y 20.714
N5710 X -58.283 Y 20.769
N5720 X -58.102 Y 20.816
N5730 X -57.921 Y 20.855
N5740 X -57.740 Y 20.887
N5750 X -57.561 Y 20.911
N5760 X -57.384 Y 20.928
N5770 X -57.208 Y 20.938
N5780 X -57.035 Y 20.941
N5790 G00 Z 3.175
N5800 G00 X -57.747 Y 11.765
N5810 G01 Z -2.000 F228.6
N5820 G01 X -57.909 Y 11.781 F304.8
N5830 X -58.074 Y 11.803
N5840 X -58.240 Y 11.832
N5850 X -58.407 Y 11.869
N5860 X -58.574 Y 11.912
N5870 X -58.742 Y 11.963
N5880 X -58.909 Y 12.022
N5890 X -59.075 Y 12.088
N5900 X -59.241 Y 12.162
N5910 X -59.404 Y 12.244
N5920 X -59.565 Y 12.333
N5930 X -59.723 Y 12.431
N5940 X -59.877 Y 12.535
N5950 X -60.028 Y 12.647
N5960 X -60.174 Y 12.766
N5970 X -60.316 Y 12.892
N5980 X -60.451 Y 13.024
N5990 X -60.581 Y 13.163
N6000 X -60.705 Y 13.307
N6010 X -60.822 Y 13.457
N6020 X -60.932 Y 13.611
N6030 X -61.035 Y 13.770
N6040 X -61.130 Y 13.933
N6050 X -61.218 Y 14.099
N6060 X -61.298 Y 14.267
N6070 X -61.370 Y 14.438
N6080 X -61.434 Y 14.611
N6090 X -61.490 Y 14.785
N6100 X -61.538 Y 14.959
N6110 X -61.578 Y 15.134
N6120 X -61.610 Y 15.308
N6130 X -61.635 Y 15.482
N6140 X -61.653 Y 15.654
N6150 X -61.663 Y 15.824
N6160 X -61.666 Y 15.993
N6170 X -61.663 Y 16.159
N6180 X -61.654 Y 16.322
N6190 X -61.651 Y 16.495
N6200 X -61.641 Y 16.671
N6210 X -61.624 Y 16.848
N6220 X -61.600 Y 17.027
N6230 X -61.568 Y 17.208
N6240 X -61.529 Y 17.389
N6250 X -61.482 Y 17.570
N6260 X -61.427 Y 17.751
N6270 X -61.364 Y 17.932
N6280 X -61.293 Y 18.112
N6290 X -61.214 Y 18.290
N6300 X -61.127 Y 18.465
N6310 X -61.031 Y 18.638
N6320 X -60.928 Y 18.808
N6330 X -60.817 Y 18.973
N6340 X -60.699 Y 19.135
N6350 X -60.573 Y 19.291
N6360 X -60.440 Y 19.443
N6370 X -60.301 Y 19.588
N6380 X -60.156 Y 19.727
N6390 X -60.004 Y 19.860
N6400 X -59.848 Y 19.986
N6410 X -59.686 Y 20.104
N6420 X -59.521 Y 20.215
N6430 X -59.351 Y 20.318
N6440 X -59.178 Y 20.414
N6450 X -59.003 Y 20.501
N6460 X -58.825 Y 20.580
N6470 X -58.645 Y 20.651
N6480 X -58.465 Y 20.714
N6490 X -58.283 Y 20.769
N6500 X -58.102 Y 20.816
N6510 X -57.921 Y 20.855
N6520 X -57.740 Y 20.887
N6530 X -57.561 Y 20.911
N6540 X -57.384 Y 20.928
N6550 X -57.208 Y 20.938
N6560 X -57.035 Y 20.941
N6570 G00 Z 3.175
N6580 G00 X -57.747 Y 11.765
N6590 G01 Z -2.500 F228.6
N6600 G01 X -57.909 Y 11.781 F304.8
N6610 X -58.074 Y 11.803
N6620 X -58.240 Y 11.832
N6630 X -58.407 Y 11.869
N6640 X -58.574 Y 11.912
N6650 X -58.742 Y 11.963
N6660 X -58.909 Y 12.022
N6670 X -59.075 Y 12.088
N6680 X -59.241 Y 12.162
N6690 X -59.404 Y 12.244
N6700 X -59.565 Y 12.333
N6710 X -59.723 Y 12.431
N6720 X -59.877 Y 12.535
N6730 X -60.028 Y 12.647
N6740 X -60.174 Y 12.766
N6750 X -60.316 Y 12.892
N6760 X -60.451 Y 13.024
N6770 X -60.581 Y 13.163
N6780 X -60.705 Y 13.307
N6790 X -60.822 Y 13.457
N6800 X -60.932 Y 13.611
N6810 X -61.035 Y 13.770
N6820 X -61.130 Y 13.933
N6830 X -61.218 Y 14.099
N6840 X -61.298 Y 14.267
N6850 X -61.370 Y 14.438
N6860 X -61.434 Y 14.611
N6870 X -61.490 Y 14.785
N6880 X -61.538 Y 14.959
N6890 X -61.578 Y 15.134
N6900 X -61.610 Y 15.308
N6910 X -61.635 Y 15.482
N6920 X -61.653 Y 15.654
N6930 X -61.663 Y 15.824
N6940 X -61.666 Y 15.993
N6950 X -61.663 Y 16.159
N6960 X -61.654 Y 16.322
N6970 X -61.651 Y 16.495
N6980 X -61.641 Y 16.671
N6990 X -61.624 Y 16.848
N7000 X -61.600 Y 17.027
N7010 X -61.568 Y 17.208
N7020 X -61.529 Y 17.389
N7030 X -61.482 Y 17.570
N7040 X -61.427 Y 17.751
N7050 X -61.364 Y 17.932
N7060 X -61.293 Y 18.112
N7070 X -61.214 Y 18.290
N7080 X -61.127 Y 18.465
N7090 X -61.031 Y 18.638
N7100 X -60.928 Y 18.808
N7110 X -60.817 Y 18.973
N7120 X -60.699 Y 19.135
N7130 X -60.573 Y 19.291
N7140 X -60.440 Y 19.443
N7150 X -60.301 Y 19.588
N7160 X -60.156 Y 19.727
N7170 X -60.004 Y 19.860
N7180 X -59.848 Y 19.986
N7190 X -59.686 Y 20.104
N7200 X -59.521 Y 20.215
N7210 X -59.351 Y 20.318
N7220 X -59.178 Y 20.414
N7230 X -59.003 Y 20.501
N7240 X -58.825 Y 20.580
N7250 X -58.645 Y 20.651
N7260 X -58.465 Y 20.714
N7270 X -58.283 Y 20.769
N7280 X -58.102 Y 20.816
N7290 X -57.921 Y 20.855
N7300 X -57.740 Y 20.887
N7310 X -57.561 Y 20.911
N7320 X -57.384 Y 20.928
N7330 X -57.208 Y 20.938
N7340 X -57.035 Y 20.941
N7350 G00 Z 3.175
N7360 G00 X -57.747 Y 11.765
N7370 G01 Z -3.000 F228.6
N7380 G01 X -57.909 Y 11.781 F304.8
N7390 X -58.074 Y 11.803
N7400 X -58.240 Y 11.832
N7410 X -58.407 Y 11.869
N7420 X -58.574 Y 11.912
N7430 X -58.742 Y 11.963
N7440 X -58.909 Y 12.022
N7450 X -59.075 Y 12.088
N7460 X -59.241 Y 12.162
N7470 X -59.404 Y 12.244
N7480 X -59.565 Y 12.333
N7490 X -59.723 Y 12.431
N7500 X -59.877 Y 12.535
N7510 X -60.028 Y 12.647
N7520 X -60.174 Y 12.766
N7530 X -60.316 Y 12.892
N7540 X -60.451 Y 13.024
N7550 X -60.581 Y 13.163
N7560 X -60.705 Y 13.307
N7570 X -60.822 Y 13.457
N7580 X -60.932 Y 13.611
N7590 X -61.035 Y 13.770
N7600 X -61.130 Y 13.933
N7610 X -61.218 Y 14.099
N7620 X -61.298 Y 14.267
N7630 X -61.370 Y 14.438
N7640 X -61.434 Y 14.611
N7650 X -61.490 Y 14.785
N7660 X -61.538 Y 14.959
N7670 X -61.578 Y 15.134
N7680 X -61.610 Y 15.308
N7690 X -61.635 Y 15.482
N7700 X -61.653 Y 15.654
N7710 X -61.663 Y 15.824
N7720 X -61.666 Y 15.993
N7730 X -61.663 Y 16.159
N7740 X -61.654 Y 16.322
N7750 X -61.651 Y 16.495
N7760 X -61.641 Y 16.671
N7770 X -61.624 Y 16.848
N7780 X -61.600 Y 17.027
N7790 X -61.568 Y 17.208
N7800 X -61.529 Y 17.389
N7810 X -61.482 Y 17.570
N7820 X -61.427 Y 17.751
N7830 X -61.364 Y 17.932
N7840 X -61.293 Y 18.112
N7850 X -61.214 Y 18.290
N7860 X -61.127 Y 18.465
N7870 X -61.031 Y 18.638
N7880 X -60.928 Y 18.808
N7890 X -60.817 Y 18.973
N7900 X -60.699 Y 19.135
N7910 X -60.573 Y 19.291
N7920 X -60.440 Y 19.443
N7930 X -60.301 Y 19.588
N7940 X -60.156 Y 19.727
N7950 X -60.004 Y 19.860
N7960 X -59.848 Y 19.986
N7970 X -59.686 Y 20.104
N7980 X -59.521 Y 20.215
N7990 X -59.351 Y 20.318
N8000 X -59.178 Y 20.414
N8010 X -59.003 Y 20.501
N8020 X -58.825 Y 20.580
N8030 X -58.645 Y 20.651
N8040 X -58.465 Y 20.714
N8050 X -58.283 Y 20.769
N8060 X -58.102 Y 20.816
N8070 X -57.921 Y 20.855
N8080 X -57.740 Y 20.887
N8090 X -57.561 Y 20.911
N8100 X -57.384 Y 20.928
N8110 X -57.208 Y 20.938
N8120 X -57.035 Y 20.941
N8130 G00 Z 3.175
N8140 G00 X -58.132 Y 11.847
N8150 G01 Z -0.500 F228.6
N8160 G01 X -57.022 Y 11.549 F304.8
N8170 G00 Z 3.175
N8180 G00 X -58.132 Y 11.847
N8190 G01 Z -1.000 F228.6
N8200 G01 X -57.022 Y 11.549 F304.8
N8210 G00 Z 3.175
N8220 G00 X -58.132 Y 11.847
N8230 G01 Z -1.500 F228.6
N8240 G01 X -57.022 Y 11.549 F304.8
N8250 G00 Z 3.175
N8260 G00 X -58.132 Y 11.847
N8270 G01 Z -2.000 F228.6
N8280 G01 X -57.022 Y 11.549 F304.8
N8290 G00 Z 3.175
N8300 G00 X -58.132 Y 11.847
N8310 G01 Z -2.500 F228.6
N8320 G01 X -57.022 Y 11.549 F304.8
N8330 G00 Z 3.175
N8340 G00 X -58.132 Y 11.847
N8350 G01 Z -3.000 F228.6
N8360 G01 X -57.022 Y 11.549 F304.8
N8370 G00 Z 3.175
N8380 G00 X -57.575 Y 20.907
N8390 G01 Z -0.500 F228.6
N8400 G01 X -46.958 Y 21.873 F304.8
N8410 G00 Z 3.175
N8420 G00 X -57.575 Y 20.907
N8430 G01 Z -1.000 F228.6
N8440 G01 X -46.958 Y 21.873 F304.8
N8450 G00 Z 3.175
N8460 G00 X -57.575 Y 20.907
N8470 G01 Z -1.500 F228.6
N8480 G01 X -46.958 Y 21.873 F304.8
N8490 G00 Z 3.175
N8500 G00 X -57.575 Y 20.907
N8510 G01 Z -2.000 F228.6
N8520 G01 X -46.958 Y 21.873 F304.8
N8530 G00 Z 3.175
N8540 G00 X -57.575 Y 20.907
N8550 G01 Z -2.500 F228.6
N8560 G01 X -46.958 Y 21.873 F304.8
N8570 G00 Z 3.175
N8580 G00 X -57.575 Y 20.907
N8590 G01 Z -3.000 F228.6
N8600 G01 X -46.958 Y 21.873 F304.8
N8610 G00 Z 3.175
N8620 G01 Z -0.500 F228.6
N8630 G01 X -46.766 F304.8
N8640 X -46.657 Y 21.870
N8650 X -46.545 Y 21.860
N8660 X -46.432 Y 21.844
N8670 X -46.318 Y 21.820
N8680 X -46.203 Y 21.788
N8690 X -46.089 Y 21.749
N8700 X -45.976 Y 21.703
N8710 X -45.866 Y 21.648
N8720 X -45.757 Y 21.586
N8730 X -45.653 Y 21.516
N8740 X -45.552 Y 21.440
N8750 X -45.457 Y 21.356
N8760 X -45.367 Y 21.266
N8770 X -45.284 Y 21.171
N8780 X -45.207 Y 21.070
N8790 X -45.137 Y 20.966
N8800 X -45.075 Y 20.858
N8810 X -45.021 Y 20.747
N8820 X -44.974 Y 20.634
N8830 X -44.935 Y 20.520
N8840 X -44.904 Y 20.406
N8850 X -44.880 Y 20.292
N8860 X -44.863 Y 20.178
N8870 X -44.853 Y 20.067
N8880 X -44.850 Y 19.957
N8890 Y 15.934
N8900 G00 Z 3.175
N8910 G00 X -46.958 Y 21.873
N8920 G01 Z -1.000 F228.6
N8930 G01 X -46.766 F304.8
N8940 X -46.657 Y 21.870
N8950 X -46.545 Y 21.860
N8960 X -46.432 Y 21.844
N8970 X -46.318 Y 21.820
N8980 X -46.203 Y 21.788
N8990 X -46.089 Y 21.749
N9000 X -45.976 Y 21.703
N9010 X -45.866 Y 21.648
N9020 X -45.757 Y 21.586
N9030 X -45.653 Y 21.516
N9040 X -45.552 Y 21.440
N9050 X -45.457 Y 21.356
N9060 X -45.367 Y 21.266
N9070 X -45.284 Y 21.171
N9080 X -45.207 Y 21.070
N9090 X -45.137 Y 20.966
N9100 X -45.075 Y 20.858
N9110 X -45.021 Y 20.747
N9120 X -44.974 Y 20.634
N9130 X -44.935 Y 20.520
N9140 X -44.904 Y 20.406
N9150 X -44.880 Y 20.292
N9160 X -44.863 Y 20.178
N9170 X -44.853 Y 20.067
N9180 X -44.850 Y 19.957
N9190 Y 15.934
N9200 G00 Z 3.175
N9210 G00 X -46.958 Y 21.873
N9220 G01 Z -1.500 F228.6
N9230 G01 X -46.766 F304.8
N9240 X -46.657 Y 21.870
N9250 X -46.545 Y 21.860
N9260 X -46.432 Y 21.844
N9270 X -46.318 Y 21.820
N9280 X -46.203 Y 21.788
N9290 X -46.089 Y 21.749
N9300 X -45.976 Y 21.703
N9310 X -45.866 Y 21.648
N9320 X -45.757 Y 21.586
N9330 X -45.653 Y 21.516
N9340 X -45.552 Y 21.440
N9350 X -45.457 Y 21.356
N9360 X -45.367 Y 21.266
N9370 X -45.284 Y 21.171
N9380 X -45.207 Y 21.070
N9390 X -45.137 Y 20.966
N9400 X -45.075 Y 20.858
N9410 X -45.021 Y 20.747
N9420 X -44.974 Y 20.634
N9430 X -44.935 Y 20.520
N9440 X -44.904 Y 20.406
N9450 X -44.880 Y 20.292
N9460 X -44.863 Y 20.178
N9470 X -44.853 Y 20.067
N9480 X -44.850 Y 19.957
N9490 Y 15.934
N9500 G00 Z 3.175
N9510 G00 X -46.958 Y 21.873
N9520 G01 Z -2.000 F228.6
N9530 G01 X -46.766 F304.8
N9540 X -46.657 Y 21.870
N9550 X -46.545 Y 21.860
N9560 X -46.432 Y 21.844
N9570 X -46.318 Y 21.820
N9580 X -46.203 Y 21.788
N9590 X -46.089 Y 21.749
N9600 X -45.976 Y 21.703
N9610 X -45.866 Y 21.648
N9620 X -45.757 Y 21.586
N9630 X -45.653 Y 21.516
N9640 X -45.552 Y 21.440
N9650 X -45.457 Y 21.356
N9660 X -45.367 Y 21.266
N9670 X -45.284 Y 21.171
N9680 X -45.207 Y 21.070
N9690 X -45.137 Y 20.966
N9700 X -45.075 Y 20.858
N9710 X -45.021 Y 20.747
N9720 X -44.974 Y 20.634
N9730 X -44.935 Y 20.520
N9740 X -44.904 Y 20.406
N9750 X -44.880 Y 20.292
N9760 X -44.863 Y 20.178
N9770 X -44.853 Y 20.067
N9780 X -44.850 Y 19.957
N9790 Y 15.934
N9800 G00 Z 3.175
N9810 G00 X -46.958 Y 21.873
N9820 G01 Z -2.500 F228.6
N9830 G01 X -46.766 F304.8
N9840 X -46.657 Y 21.870
N9850 X -46.545 Y 21.860
N9860 X -46.432 Y 21.844
N9870 X -46.318 Y 21.820
N9880 X -46.203 Y 21.788
N9890 X -46.089 Y 21.749
N9900 X -45.976 Y 21.703
N9910 X -45.866 Y 21.648
N9920 X -45.757 Y 21.586
N9930 X -45.653 Y 21.516
N9940 X -45.552 Y 21.440
N9950 X -45.457 Y 21.356
N9960 X -45.367 Y 21.266
N9970 X -45.284 Y 21.171
N9980 X -45.207 Y 21.070
N9990 X -45.137 Y 20.966
N10000 X -45.075 Y 20.858
N10010 X -45.021 Y 20.747
N10020 X -44.974 Y 20.634
N10030 X -44.935 Y 20.520
N10040 X -44.904 Y 20.406
N10050 X -44.880 Y 20.292
N10060 X -44.863 Y 20.178
N10070 X -44.853 Y 20.067
N10080 X -44.850 Y 19.957
N10090 Y 15.934
N10100 G00 Z 3.175
N10110 G00 X -46.958 Y 21.873
N10120 G01 Z -3.000 F228.6
N10130 G01 X -46.766 F304.8
N10140 X -46.657 Y 21.870
N10150 X -46.545 Y 21.860
N10160 X -46.432 Y 21.844
N10170 X -46.318 Y 21.820
N10180 X -46.203 Y 21.788
N10190 X -46.089 Y 21.749
N10200 X -45.976 Y 21.703
N10210 X -45.866 Y 21.648
N10220 X -45.757 Y 21.586
N10230 X -45.653 Y 21.516
N10240 X -45.552 Y 21.440
N10250 X -45.457 Y 21.356
N10260 X -45.367 Y 21.266
N10270 X -45.284 Y 21.171
N10280 X -45.207 Y 21.070
N10290 X -45.137 Y 20.966
N10300 X -45.075 Y 20.858
N10310 X -45.021 Y 20.747
N10320 X -44.974 Y 20.634
N10330 X -44.935 Y 20.520
N10340 X -44.904 Y 20.406
N10350 X -44.880 Y 20.292
N10360 X -44.863 Y 20.178
N10370 X -44.853 Y 20.067
N10380 X -44.850 Y 19.957
N10390 Y 15.934
N10400 G00 Z 3.175
N10410 G00 Z 3.176
N10420 G00 X 0.000 Y 0.000

[SpeedsCustom]

Here is what I don't get, how come when it was in EMC. When I hit start, it did what it looked like it was going too do. But then the machine did different, this is what worries me.


-Speed

[ger21]

I need you to post the .crv file from VCarve.

But, I think you have 3 separate vectors, and you need to join them into one vector.

If you're display in EMC looks right, but the machine does something different, it sounds like it may be an EMC configuration issue.

[Switcher]

I think it was open vectors also.

I took your g-code, converted it to a .dxf, started a new project in Vcarve Pro 4.6, then opened the .dxf file.

I found it had 32 open vectors (most of that was rapid moves from the g-code when I converted to .dxf), I think what you did was leave an open space between your arcs & straight lines.

I joined all the vectors like this:

1) Select all vectors (in drawing view)

2) Select the button on the left side of the screen "Weld Selected Vectors" this will join everything into 1 part (start position = end position).

3) After I joined all the open vectors, it created a triangle (like ger21 said = 3 open vectors) I selected the triangle, then Right clicked & deleted the triangle, this left me with the final shape in the screenshot. Is that the shape your after?

4) Select my tools etc... & let the program calculate/produce the g-code (sceenshot below).


.

[Switcher]

Here is your g-code that you posted above plotted in NcPlot, notice the Z-axis moves, all around the part (2nd screenshot below).

If it was one vector inside Vcarve Pro, I think it would only move in Z-axis in 1 location (X,Y), on a simple profile like that.


.

[Switcher]

SpeedsCustom,

Have you already cut good parts with EMC, before you tried Vcarve Pro?

.

[SpeedsCustom]

Switcher, it does make sense, I did have open lines and stuff, and I didn't weld the vectors together.

I have not been able too cut any good parts, because What I had was a Rasta affect and was not intedned for the 2.5 d work, that why i bought Vcarvepro.

But I was able to engrave words and my first really cool picture.


I'll com back with updates.

Thanks,


-Speed

[Switcher]

If you have anymore g-code files, save them as a text file (.txt) inside a text editor (Notepad, etc...) then post the .txt file.

That will save a bunch of scrolling, here.

Also If you post any files from Vcarve, you'll need to zip them, before posting here.


.

[SpeedsCustom]

Switcher, I think you were right about the welding and everything else of my first part. I designed it in minutes, without caring too connect everything. How come when I try too weld my piece, it like breaks apart and I then have lines going through my work? Should I weld, them while designing it, one at a time?

Also, just to prove that everything is ok, and it was my own fault on design.

Do you remember making that part for me a few weeks ago switcher? You know that bar looking one for my brother RC car, then you wrote SpeedsCustom on it? Well Just to show that the machine and program work together.

I only profiled it at 1 mm, not the 4.1mm it needed.


So it does work, everything just needs too correspond with each other, thats all. And this part only had moved on the z on one side, so far. It's looking good, I'm happy.


I just need too figure out how to profile that 1st piece I did, modify it and continue doing it!

[Switcher]

How come when I try too weld my piece, it like breaks apart and I then have lines going through my work?

I'm not really sure, If you weld something together & don't like the result it can be undone "Edit\Undo Boolan Add", or just right click on any unwanted lines & select delete.

Should I weld, them while designing it, one at a time?

It shouldn't matter at what time in your designing that you weld the vectors If all the vectors are on the same layer.

I'll tell you, one of the things I like best about Vcarve Pro is, that you can work in layers. This is important because you can select what specific tool cuts each specific layer. Like in the part below, the top part (layer = Test123) is just an example of a rectangle & 2 circles that are not welded together, notice that it really shows up after the part is cut.

The bottom part is on 2 sperate layers (I gave them custom names of my own).

1) Layer1 = "My Profile Cut"

2) Layer2 = "My Custom Text"

Once you get the layers thing down it will help you a lot.



Note:
To add a part to a specific layer, while in the drawing view, right click the object, then at the bottom of the context menu highlight "Move To Layer" & select the layer you want, or create a new layer.



.