VCarve Pro 4.5 has been released.

[bsimages]

www.vectric.com has made the following announcement: "We are very pleased to announce that VCarve Pro 4.5 has been released."
Go check it out, they have a full description of the new additions, and a link for downloading the upgrade. It looks like it is a great an upgrade!

Bill Schober
Pine Grove, CA

[ger21]

If you can't find it, it's in the "general" section of their forum.

[bsimages]

I ran the upgrade and had no problems what so ever. I then created a Cambodian clock face, for a friend, that I have attached a virtual picture of. The star feature (12 pointed in this case) sure helped in placing the numbers in the correct places! Plus I like the way it looked and included it in the cut. I just cut out on a poplar board. Looks nice...just need to stain it and finish it now.
I have made clocks before and the hardest part was placing the numbers in the correct places. For this one I used Cambodian TrueType font. It was by far the easiest one I ever have made

Bill Schober
Pine Grove, CA

[Tony Mac]

Vectric is very pleased to announce that VCarve Pro 4.5 has been released.



VCarve Pro 4.5 includes new design and layout tools – Rulers, Guide Lines, Snap Grid and Snapping options – that make drawing and designing much easier and quicker. New 2D toolpath previews - wireframe and solid - instantly show where the cutter will remove material and make it very clear if the tool geometry is too large or the wrong toolpath strategy has been used.

***********************************************************************************

This is a Free Upgrade for all customers who are licensed to run version VCarve Pro 4.0. The update information has been emailed to these customers.

More details are available from the Vectric Forum >

If you have any questions about updating to 4.5 please email – support@vectric.com

***********************************************************************************

The What’s New in VCarve Pro 4.5 PDF can be downloaded from What’s New in 4.5 >

Summary

New 2D Drawing and Layout Tools for precise, quick and easier design work
• Rulers
• Guide Lines
• Snap Grid

Snapping Options when drawing and designing
• End points, mid-points, object centers
• Guides

2D Toolpath Preview that instantly shows where the cutter will machine and where material will be removed
• Wireframe with direction of machining
• Solid Fill shows where material maybe left

Additional drawing tools for creating designs
• Stars & Polygons
• Corner Filleting

Miscellaneous
• Multiple Node Smoothing
• Move objects using incremental distances
• Interactive Drag Copy
• Custom 2D / 3D view control
• Updated Help File

***********************************************************************************

Tony

PS Thanks Bill and Gerry.

[Switcher]

Direct Link (Vectric forum post):
http://vectric.com/forum/viewtopic.php?t=2327



.

[bgriggs]

Originally Posted by Tony Mac Vectric is very pleased to announce that VCarve Pro 4.5 has been released. VCarve Pro 4.5 includes new design and layout tools – Rulers, Guide Lines, Snap Grid and Snapping options – that make drawing and designing much easier and quicker. New 2D toolpath previews - wireframe and solid - instantly show where the cutter will remove material and make it very clear if the tool geometry is too large or the wrong toolpath strategy has been used. *********************************************************************************** This is a Free Upgrade for all customers who are licensed to run version VCarve Pro 4.0. The update information has been emailed to these customers. More details are available from the Vectric Forum > If you have any questions about updating to 4.5 please email – support@vectric.com *********************************************************************************** The What’s New in VCarve Pro 4.5 PDF can be downloaded from What’s New in 4.5 > Summary New 2D Drawing and Layout Tools for precise, quick and easier design work • Rulers • Guide Lines • Snap Grid Snapping Options when drawing and designing • End points, mid-points, object centers • Guides 2D Toolpath Preview that instantly shows where the cutter will machine and where material will be removed • Wireframe with direction of machining • Solid Fill shows where material maybe left Additional drawing tools for creating designs • Stars & Polygons • Corner Filleting Miscellaneous • Multiple Node Smoothing • Move objects using incremental distances • Interactive Drag Copy • Custom 2D / 3D view control • Updated Help File *********************************************************************************** Tony PS Thanks Bill and Gerry.

How about a special holiday sale for CNCZONE members please???????

Bill

[bsimages]

Hey Bill
They have the new 4.5 free trial version up for download @: http://www.vectric.com/WebSite/Vectr...s/download.htm

Bill Schober
Pine Grove, CA