My 1st Lithophane...

[bsimages]

The Great American Bald Eagle...
I put a pen in front to show the proportions of the lithophane.
The cut area is 12.5" by 8.33" and the material is bone white corian 1/4" stock.
I used a 0.031" ball nose bit.

Bill Schober

[ErnieD]

Hi bsimages,

What software did you use to generate the code? What machine did you use to make this beautiful image? Are you willing to share the feed, speed, stepover,spindle rpm etc.? I will assume that the cutter was carbide.

Thanks,

ErnieD

[High Seas]

Originally Posted by ErnieD What software did you use to generate the code? What machine did you use to make this beautiful image? Are you willing to share the feed, speed, stepover,spindle rpm etc.? I will assume that the cutter was carbide.

Maybe the gCode? Many thanks for sharing such a beautiful project!

Jim

[bsimages]

PhotoVCarve is the software, the bit is carbide, the settings are in the attached screen capture, the gCode is a kind of large (20 MBs or 660,000 lines of code!) It took over 15 hours to cut...but was well worth the wait. The machine is homemade of my own design. Here is a good link for how to's: http://www.vectric.com/WebSite/Vectr..._tutorials.htm

Bill Schober

[Caprirs]

Looks great. Do you have flood coolant? Or how do you deal with the dust?

[bsimages]

The dust is more like plastic snow...I simply vacuum it up after the job is done.
It is easier than sawdust to deal with.
Bill

[epineh]

15 hours!!! ... I bet you were praying for the power NOT to drop out by the 11th or 12th hour, lol.

Nice work !!!

Russell.

[bsimages]

I use two UPS's
One for the PC and CNC machine and one for the router motor.
Bill

[ImanCarrot]

Awesome work! absolutely beautiful! thanks for showing us