Have your tried using the 'Create Job Sheet' under the toolpaths tab? Beyond that I'm not aware of any other method.
Hi all....
Looking for a way ( if possible by any chance?)...to kinda extract or copy or....a mean to get this text in the bubble window when you hover the mouse point over a toolpath in the toolpath list ( see photo)
so it may be copied to some texte format else wear ( say like a notepad or Word doc)
Thks
Similar Threads:
Have your tried using the 'Create Job Sheet' under the toolpaths tab? Beyond that I'm not aware of any other method.
..."Have your tried using the 'Create Job Sheet' under the toolpaths tab? " Nop !!
Actually, in my version (4.5)....can't see any of this "Create Job Sheet" under the toolpath tab !!...
May you show or advise where YOU see this
Tks !
Have you tried typing it in as Text in that area?
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)
Best I can tell....no text can by typed in any area ??
What are you referring to...or where's that texte area ?
Just checked with a V8, and......although the "job sheet" is there and quite extensive......I remain more interested with my 1st question !!
I doubt that there's any way to do it.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Not text, but you can just CTRL-PRNTSCRN then open MS Paint and paste, select that blurb box, and crop, and save it...
Thanks Lou, Gerry and plamp.....that's what I've been doing, but was kinda "hoping" to discover an alternative way to this past & crop process, allowing to edit or....
Thanks all for you time
Sorry for the confusion guys! I misread the question. I thought that he wanted to type the text on the model which could easily be done with the text vector tool! I'm for using shift prtscn and copy it into paint so it can at least be captured.
Billo
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)
Robert...
Looks like time for an upgrade to the latest version!!
Gary Campbell GCnC Control
Servo Control & ATC Retrofits
" Sorry for the confusion guys! "... no harms done
Have to admit humbly....never thought of that @_# !!
Another good reason why social group are so....indispensable !!
ThnKs Lou !!....