Need Help! Aspire and Gravograph IS6000 + Replace spindle motor


Results 1 to 4 of 4

Thread: Aspire and Gravograph IS6000 + Replace spindle motor

  1. #1
    Registered
    Join Date
    Jan 2016
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Aspire and Gravograph IS6000 + Replace spindle motor

    I'm Paulo Santos from Portugal, and i need some help.

    How can i replace the spindle motor from my Gravograph IS6000 whith out call the gravograph services.

    I have a 75 W spindle motor and i want to replace for one more powerfull.

    Another question: The Software ASPIRE will full function whith the Gravograph IS6000 ?

    My IS6000 is from the year 2001 and the present software is Gravostyle 98, and is plugged in the parallel port on PC.

    Best regards,

    Paulo Santos

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Aspire and Gravograph IS6000 + Replace spindle motor

    ASpire comes with a post processor for an IS6000. I would contact Vectric and ask them before purchasing.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Member
    Join Date
    Sep 2005
    Location
    usa
    Posts
    171
    Downloads
    0
    Uploads
    0

    Default Re: Aspire and Gravograph IS6000 + Replace spindle motor

    The Aspire won't work on your machine. It is a propriatary type of software/hardware.
    I have an older New Hermes machine that I use aspire on, but had to convert it to run on Mach3.
    This involves rewiring, controls.
    I also used a rc plane style motor for the spindle drive.
    very complex project.



  4. #4
    Member
    Join Date
    Jan 2007
    Location
    usa
    Posts
    1795
    Downloads
    0
    Uploads
    0

    Default Re: Aspire and Gravograph IS6000 + Replace spindle motor

    that has a top loading spindle.. if you feel you ca get use a regular spindle then you can buy many type..

    heres one.. it has rpm up to 60000 and you can achieve a lot faster federate..

    0 3KW 300W 60000rpm Water Cooled CNC Spindle Motor with 1 5KW VFD Bracket Pump | eBay

    of course it pending on how much you plan to invest..

    changing the control... unless the old is real bad try to keep it..

    other wise that also will cost about 500.. true the machine you have has a great mechanic..



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Aspire and Gravograph IS6000 + Replace spindle motor

Aspire and Gravograph IS6000 + Replace spindle motor