Reply with QuoteVery cool! I know some of the guys were looking for simple Christmas designs to play with, so I'm sure these will get some use!
Free Christmas Designs!
With Christmas only a couple of weeks away, why not use the Free Trial Version of VCarve Wizard 2.0 (or the full registered version), to cut some great Yard Ornaments and Decorative Festive Designs on your CNC machine.
The designs shown below can be downloaded from,
Download Christmas Designs
Remember that these files can be scaled to any machine / material size so you can have a go at making them for yourself. Have Fun and drop me a note if you have any questions or need my assistance.
Regards,
Tony Mac
tonym@vectric.com
Similar Threads:
Very cool! I know some of the guys were looking for simple Christmas designs to play with, so I'm sure these will get some use!
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Check Out My Build-Log: http://www.cnczone.com/forums/showthread.php?t=6452
Thanks Tony, They are great looking designs. Seasons greetings to all at the Vectric Team.
Jason
Pretty cool. Thanks for sharing them
Below is a slight variation of the Christmas Ornament design recently posted on the site. This sign was engraved into a 8.5" (220mm) diameter slate blank using a 100 included angle cutter running at 12,000 rpm and 15" per minute, using multiple 0.02" (0.5mm) Z level passes.
This design could be part of an interchangeable sign, with a different decorative design for each of the seasons - Spring, Summer, Fall (Autumn) & Winter.
Regards,
Tony Mac
Nice Tony!
Did the tool bit survived the job?! Only air cooling, right?
My business Web site - USINUM - www.cooptel.qc.ca/~usinum
My BLOG at Blogger - http://pacosarea.blogspot.com/
Hi Paco,
Yes, the job was engraved using a single cutter and without any cooling or lubricant. The same cutter was also used for a previous job into slate and has probably been cutting for 3 hours
It's showing signs of wear but still good for another hour or so's cutting.
Tony Mac
edited... re-read myself...
My business Web site - USINUM - www.cooptel.qc.ca/~usinum
My BLOG at Blogger - http://pacosarea.blogspot.com/
These are just what I have been looking for. Thanks for sharing them and have a Merry Christmas.
Posting Permissions
