Need a post for a Biesse Klever

[Jason_Scott]

Aspire has an .ISO post for my machine but when I open the files in biesse works it only shows geometry no tool and no depth of cut. Can anyone help me not to have to buy mastercam? I need to do some 3d cutting.

Similar Threads:

• Need a post processor for BIESSE ROVER 4.40 FT
• Biesse Klever/Works Software issues
• Biesse, Klever 1530 G-FT Router - Routing Table Top out of Walnut

[EddieV]

Not sure if i can help but this is how i use the software to run on a Biesse router.

I create my work and toolpaths as normal
I then choose Save Toolpaths option within Ventric and select Biesse Rover Arcs (MM) (*.*)
I then open this file with Editor on the PC attached to the Router and immediatey hit save in Editor which allows me to draw a sample of the design. If you dont hit save first it doesnt work.
I then select the file and run it.