Try the Fluting Tool.
Hello,
I'd like to gradually change the cut depth of a single line, say for example I start at 0 then over the span of 200mm step into the work 4mm. Just make a Gradient of 4mm over 200mm if possible.
Can I do this using Vector? If so How?
Thanks in advance for your help,
Rob
Similar Threads:
Website [url]http://whatisacnc.com[/url]
Try the Fluting Tool.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thank you! I'll give it a shot.
Website [url]http://whatisacnc.com[/url]