If you need help understanding how wrap around your X or Y Axis you might find this informative: CNC Rotary Tutorial - Walking Sticks By: HUMBLE STICKS
It is still under construction but you should find it quite helpful.
If you have any suggestions please post them here or use the contact form at the bottom of the tutorial page.
What you have now is great, very informative! I do think you are a little light in the actual "how to" section. I am pretty sure I can do the same thing in BobCAD, but you don't show any of the actual steps to making the CAM program. Maybe download CamStudio and make a video of making a program from scratch to accompany what you have in your 101 and 102 sections?
CNC Links & Information - Walking Sticks By: HUMBLE STICKS
I am in the process of working on the actual steps for the tutorial, as I too know that they would be helpful.
The Aspire 3 software is truly awesome, you shoulld tryout their free demo software! Download Trial Versions and Tutorials
I started out with a much earlier trial version of their V-Carve software and was blown away by it!
They have come a long way since then!!!
PS: I downloaded CamStudio and will be using it. Thanks!
Last edited by bsimages; 04-27-2011 at 07:17 PM.