Vcarve Pro won't start my router spinning

[Gary-Wiant]

When I send a job created & toolpaths saved in V-carve Pro 9 I have to manually start the router but when the job is done V-carve will turn the router off. Am I missing something in the setup? When I create toolpaths in DeskCNC it will start the router by itself.

Also not related but still in V-carve, I noticed that when routing a pocket the toolpaths alternates clock wise & counter-clock wise which is fine but when it alternates the tool picks up to Z Home then back down and starts routing again. The videos I've seen on youtube the machines don't do that.

Thanks for the help.
Gary

Similar Threads:

• First Start with VCarve Pro 6 0
• Spindle won't start spinning on Multicam
• new to using cnc router , need help using dsp controller and vcarve pro
• How does the router know where to start?
• UPgrading From VCarve 3.1 to VCarve 4 or 4.5

[mactec54]

When I send a job created & toolpaths saved in V-carve Pro 9 I have to manually start the router but when the job is done V-carve will turn the router off. Am I missing something in the setup? When I create toolpaths in DeskCNC it will start the router by itself.

Also not related but still in V-carve, I noticed that when routing a pocket the toolpaths alternates clock wise & counter-clock wise which is fine but when it alternates the tool picks up to Z Home then back down and starts routing again. The videos I've seen on youtube the machines don't do that.

Thanks for the help.
Gary

Post the start of the program (Cut/Paste it ) it could be as simple as missing the start command ( M3 16000S ) or what ever RPM you are running

[Gary-Wiant]

Ok I'll try to get that tomorrow or Tuesday at the latest.

I'm using a variable speed router, I don't have a spindle yet so it would be different line right?

[ger21]

If you are using the standard Desk CNC Inch post processor, there are no commands in it to start and stop the spindle.
I'm guessing the DeskCNC is stopping the spindle when it sees an M2 at the end.

If that's the case, you need to modify the post processor to add the appropriate commands.

[Gary-Wiant]

Gerry, thanks I'll look into doing that.

[Gary-Wiant]

Here is the photo of the monitor for the last job I routed

[mactec54]

Here is the photo of the monitor for the last job I routed

Yes just add the line like I said, at the beginning

G0Z800
G0X0Y0.
S12000M3

[Gary-Wiant]

Do I need to add that on every job or it there a way to have it show up every time I import a job.

Thanks

[mactec54]

Do I need to add that on every job or it there a way to have it show up every time I import a job.

Thanks

If your postprocessor does not put it in the program, the postprocessor would have to be modified, or you would have to put it in in each program / job if you want the spindle to turn on