Draw a single line of text with the Draw Text tool.
Draw an arc or a curve.
Select the text, then, holding the Shift key, select the arc, so both the text and arc are selected. (Text must be first).
Then select the Text on a Curve tool.
downloaded vcarvepro trial 9.0 to play with until I get my cnc in
I cannot put text on a curve is this normal for tril edition or am I doing something wrong
I watched videos on how to do it wil not let me
thanks
I
Similar Threads:
Draw a single line of text with the Draw Text tool.
Draw an arc or a curve.
Select the text, then, holding the Shift key, select the arc, so both the text and arc are selected. (Text must be first).
Then select the Text on a Curve tool.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)