You're machine is set up with the X and Y axis rotated 90° from the V Carve Screen.
You have 3 options, maybe more:
1) Stand on the side of the machine.
2) Swap the axis in Mach3
3) Rotate you V Carve File 90°
Build a text file in Vcarve, the cut preview works great. But when g code is loaded in Mach 3, it cuts vertical instead of horizontal.
Any ideas? Had machine a month and still trying to get it going.
Thanks Jim
Similar Threads:
You're machine is set up with the X and Y axis rotated 90° from the V Carve Screen.
You have 3 options, maybe more:
1) Stand on the side of the machine.
2) Swap the axis in Mach3
3) Rotate you V Carve File 90°
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)