Just do two different operations, and select only the vectors you want for each one. Don't try to do it all in one operation.
Hi I am using V Carve Pro 8.5 on my CNC. Is it possible to use the quick engrave feature with both outline and fill feature on one project?Example: I want to make a sign with Welcome centered in the middle and sunflowers at each end. I want to use the quick engrave fill on the welcome and outline on the lighthouses. Can I do that? I have tried but haven't been able to.
Thanks
Ray
Similar Threads:
Just do two different operations, and select only the vectors you want for each one. Don't try to do it all in one operation.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)