Vacuum Forming Rise Profile - CNCzone.com-The Largest Machinist Community on the net!

11-14-2010, 01:08 PM

Mcyoda

Join Date: Jul 2008

Location: USA

Posts: 68

Vacuum Forming Rise Profile

permalink

I am new to vacuum forming technology. I am planning to make around 50 of 20" x 20" x 3.5" square bucket. The bottom of the bucket I like to have some pattern like square or diamond dots like the attached pictures.

Will I get this type definition for the diamond pattern. If I am using around 2mm thick ABS sheets. The diamond pattern is around 1/2" x 5/8" and the textures are from the original sheet of the ABS.

Thanks

Last edited by Mcyoda; 11-15-2010 at 09:36 PM.

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vacuum Forming with PVC	kaseencook	Vacuum forming, Thermoforming Etc	4	04-25-2009 05:53 PM
Fibreglass and Vacuum forming	DylanF	Vacuum forming, Thermoforming Etc	7	08-30-2008 12:36 PM
VAcuum Forming	rhundl	Employment Opportunity	4	06-27-2008 10:28 PM
vacuum forming materials	charper	Vacuum forming, Thermoforming Etc	0	11-21-2006 04:43 PM
vacuum forming on the cheap?	charper	Teachers Hang out	8	11-21-2006 12:17 PM

All times are GMT -5. The time now is 12:27 PM.