So most of your breakout boards have either the DB25 parallel port by itself or with an optical coupler. Now my question is since the breakout board needs a parallel connection from the board to the computer can you use a converter that switches the DB25 to USB and still have the same functionality as if it was DB25 to DB25?
Answer: No
or would it be beneficial to get an adruino board and make my own self contained system with a monitor for programming the CNC Router? If anyone can help me out, I would greatly appreciate it. Thank you.
Answer:
See this thread:
http://www.cnczone.com/forums/genera...-software.html
Wes
Welcome to the Zone,
Jeff...