RFQ - Provide GCode for Lathe


Results 1 to 3 of 3

Thread: RFQ - Provide GCode for Lathe

  1. #1
    Registered
    Join Date
    Oct 2015
    Posts
    4
    Downloads
    1
    Uploads
    0

    Default RFQ - Provide GCode for Lathe

    I have a 7x12 lathe using Mach3 Turn. I need someone to help me model some small parts and provide the gcode to me. Parts are for writing pens and include the pen section, similar to the photo attached, some tapered ends on rods about 5/8 in diameter, and other parts. I can provide sample photos and hand drawings with dimensions. I need the outside profiles only, no drilling, boring or threading. I am in MA, but will work with someone in any US location via email/phone. Thanks!

    Similar Threads:
    Attached Thumbnails Attached Thumbnails RFQ - Provide GCode for Lathe-img_0951-jpg  


  2. #2
    Registered
    Join Date
    Jun 2005
    Location
    USA
    Posts
    65
    Downloads
    5
    Uploads
    0

    Default Re: RFQ - Provide GCode for Lathe

    post an image. i will convert it. you decide if it works for you. no charge to find out.



  3. #3
    Member konwey's Avatar
    Join Date
    May 2017
    Location
    China
    Posts
    73
    Downloads
    0
    Uploads
    0

    Default Re: RFQ - Provide GCode for Lathe

    I have the experience to finish these parts
    If there are other parts processing
    Please contact me at kon@cncmachining.cc

    Over 15 year in cnc machining parts business.CNC Turning, Milling, Drilling, Planning, Grinding, Welding ./www.plusminusthree.com Email?kon@plusminusthree.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

RFQ - Provide GCode for Lathe

RFQ - Provide GCode for Lathe