- 6061-T6 small single cylinder for air cooled combustion engine
-
Registered
6061-T6 small single cylinder for air cooled combustion engine
Need CNC or machining center for prototype & production of small single cylinder for air cooled combustion engine
T6 6061 approximately 3x6x6 inches (can supply material)
Tolerances of +/- .002” in critical areas (not everywhere)
Runs of 10-20 units after prototype is approved
Located in Texas preferably
Pics for reference only. We will install iron sleeve in house
Must sign NDA before I send STEP, SLDD & PDF’s for RFQ
info@fujintechnologies.com
Similar Threads:
-
-
Registered
Re: 6061-T6 small single cylinder for air cooled combustion engine
Email Sent.
Thanks, Matt Mittler
Mittler Machine Works
matt@mittlermachineworks.com
www.mittlermachineworks.com
-
Member
Re: 6061-T6 small single cylinder for air cooled combustion engine
-
Registered
Re: 6061-T6 small single cylinder for air cooled combustion engine
No new RFQ for this part please. Thanks
- 6061-T6 small single cylinder for air cooled combustion engine
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules