Small grinding (possibly turning job) in DFW


Results 1 to 4 of 4

Thread: Small grinding (possibly turning job) in DFW

  1. #1
    Member
    Join Date
    Aug 2010
    Location
    Texas
    Posts
    57
    Downloads
    0
    Uploads
    0

    Default Small grinding (possibly turning job) in DFW

    Hey guys.

    I don't have a surface grinder and a customer needs some hardened spacers ground down - they're 29mm diameter rounds varying from 1/4 to 1/8 of an in. Does anyone know anyone who wants/can do this?

    Thanks,
    Will

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2012
    Location
    usa
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default Re: Small grinding (possibly turning job) in DFW

    PM sent. Im located in DFW



  3. #3
    Member
    Join Date
    Aug 2010
    Location
    Texas
    Posts
    57
    Downloads
    0
    Uploads
    0

    Default Re: Small grinding (possibly turning job) in DFW

    For some reason I never got the PM Sending you one.



  4. #4
    Member
    Join Date
    Apr 2012
    Location
    usa
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default Re: Small grinding (possibly turning job) in DFW

    What is the material, hardness, current thickness, and tolerance? You have PM turned off I think.

    Regards,



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Small grinding (possibly turning job) in DFW

Small grinding (possibly turning job) in DFW