RFQ Aluminum Disk

[SilverS]

Extruded aluminum is ok, thickness isn't critical
Aluminum Type 6063 is prefered but 6061 is acceptable.

Qty is 32 of these disks
Thickness 1/4 inch
Diameter 3 inches
4 holes 1/4 inch each drilled
chamfered or radiused outside edge of disk
Shipped to Michigan


.iges file is on my dropbox
https://www.dropbox.com/s/ig7jgkxhf7...Disk.iges?dl=0


Picture is below

Similar Threads:

• Aluminum Disk need 25
• Need Help!- U Disk Problem
• Newbie- mastercam disk
• there is no disk in the drive. Please insert a disk into drive\device\harddisk\dr2
• boot disk

[ten4machining]

we would like to send you a quote. could you please provide your email? or you can email us at 10.4machining@gmail.com

[devolution_mach]

If you could send me an email atgehret@gmail.com I would be more than happy to reply with a quote.

Thank you

[mittler]

Pm Sent.

Thanks, Matt Mittler
Mittler Machine Works

matt@mittlermachineworks.com

[SilverS]

Thanks for all the quotes.
I have awarded the job to a shop.

[Eddy_Yu]

Hi,


How are you doing today?


This is Eddy from HH Plastic Mold Co.,Ltd, which is located in Shenzhen China. We have been specialized in the mold industry for over 10 years

We have rich experience in the plastic mold designing & manufacturing and CNC machining parts processing, and provide the one-stop service of quoting, drawing, production,


shipment and after-sales service

If you work out any new mold design or need any CNC machining service, please send the drawings and detailed requirement to my email at Eddy@hemold.com? Then we could work out


the best price for you

Best regards,


Eddy

HH Plastic Mold Co.,Ltd
Yong Jian Hong Technology Industrial Park ,Song Yu Road No.20, Song Gang Street, Bao’an
District, Shenzhen, P.R.C 518104
Tel: +86-755-23729206
Email: Eddy@hemold.com
WhatsApp / Skype / Wechat : + 86 13929082627
Website : HH Plastic Mold Co.,Ltd.