Electrical connector - brass w/tin plate 2-3 sized qty 100ea

[43G508]

I have a flag type terminal I would like to get produced. Its for antique vehicles. Brass with tin plating.

first run would be 2 different sizes, qty 100 each. Have not finished drawing but here is a photo of the part in one of the sizes:



Similar Threads:

• Problem- Electrical connector for Japan Servo KT60LM06 stepper motor
• cutters for engraving brass plate
• machining brass plate
• Help machining C260 brass plate.

[iwaskevin]

What size Is the hole are these copper

[Jim Dawson]

Would any of these work http://www.tnb.com/ps/endeca/index.c...1010+3413&Ntt=

Or these https://www.mcmaster.com/#flag-terminals/=15xd9w5

[43G508]

One hole is .190in the other size will be slightly larger (waiting for part to be mailed to me).

[43G508]

No, these are for wiring harnesses for antique vehicles... modern parts are visually not even close.

[sabine]

Do you have a bigger picture? I'm having a hard time seeing the details.

[XYZ-ABC]

No, these are for wiring harnesses for antique vehicles... modern parts are visually not even close.

Are you still needing a quote on these?
Thanks

Sent from my SM-S902L using Tapatalk

[BIG IGG]

I have a flag type terminal I would like to get produced. Its for antique vehicles. Brass with tin plating.

first run would be 2 different sizes, qty 100 each. Have not finished drawing but here is a photo of the part in one of the sizes:

I PM'ed you