MDF sign 4 ft long x ~2 feet tall

[moparx12]

I would like to get a quote for a Peterbilt sign, relief cut from 2 pieces of 3/4" MDF glued together and unfinished. Letters should be rounded and protrude from the background. outer shape should be oval. Needs to closely match the and be scaled from the official logo.

Similar Threads:

• High Density Urethane Foam Tooling/Sign Board - 12lb and 30lb - 100+ Cubic Feet Avail
• How to get a 81.5" tall mill through a 83" tall opening
• Sign structure for a small Precision Board sign
• Growing tall
• How tall is too tall ?

[CYoung]

So do you just want an oval cut for one pc of MDF and the letters cut from another pc of MDF that could be glued on top of the oval?

[moparx12]

So do you just want an oval cut for one pc of MDF and the letters cut from another pc of MDF that could be glued on top of the oval?

That would work,yes, but the border would also need to be glued on. I was envisioning gluing 2 sheets together first, then cutting the materal out. The protrusion of the letters/border can be but dont need to be the full .75" thickness of one sheet of mdf. Does that make sense?

[alevitt53]

Where are you located to calculate shipping charges?

[jalessi]

Moparx12,

How about something like this?

[moparx12]

Thank you everyone! This job has been awarded.

- - - Updated - - -

That is almost exactly the design we ended up going with.