Why are you not going back to the shop you had good luck with before?
You really need to finish up your drawings and post those. No way to quote based off the pictures, not even half ass accurately anyway.
Hi,
I had good luck last time i posted here so i'm going to try again. I'm looking at getting 10 sets (a set includes 2 of the below picture) of head covers made out of aluminum with the possibility of more in the future. I do not have a finished drawing as I would like to see if it financially possible first before, so yes a rough estimate is fine.
Side piece dimensions: 6"x 3.5" x 2"
Top Piece dimensions: 8.5"x 6" x 1/4" thick
I can produced the finished drawing in Autodesk Inventor of the parts.
Thanks.
Similar Threads:
Last edited by hoops2; 07-25-2014 at 04:03 PM.
Why are you not going back to the shop you had good luck with before?
You really need to finish up your drawings and post those. No way to quote based off the pictures, not even half ass accurately anyway.
send drawings to bigchipping@gmail.com and I will provide a quote.
I also need a completion date estimate.
Big Chipin, spreading tha cheese, I be Big Chipin for days!
Hi to all,
Is this possible to send the drawing to us at this email address: sl.wong@prototree.com for quotation purpose? Thanks.
BR
/SL Wong
Sales Manager
Proto Tree LLC
website: Proto Tree
email: sl.wong@prototree.com
Hello,
Please send drawings and or the solid models to hfcncmilling@gmail.com with an expected delivery date for a quote. Thanks.
Is this still open?
Interested in quoting this job. Please send finished drawing and or solid model for quote to skydakmachining@gmail.com
Thanks
Brad