Get a 2HP Harbor Freight dust collector.
I'm a one man hobbyist, very low volume.
My current idea of dust control is a leaf blower!
I'm looking to add a dust evacuation system, most likely a shop*vac style system. I saw a much larger firm using the same system very effectively.
Tell me what you use & suggest.
Appreciate it guys!
Similar Threads:
Get a 2HP Harbor Freight dust collector.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I have a commercial car wash style vacuum that I picked up. A lot of suck, but the air volume is a bit lacking. Gerry is correct, the HF 2hp dust collector would be the better system. It would be much better coupled to a 55 gal barrel with a cyclone attached to the lid. Something like this. https://www.woodcraft.com/products/o...FVFffgodLQMNhQ
It would, but it's very good by itself, for a lot less money. Just be sure to get it on sale, or at least with a 20% off coupon.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I love mine had it about 5 years now and won't run a saw without it
Sent from my SM-G920P using Tapatalk