Help.

[havnerotte]

Hi all i have a huge problem. i have just bought a old used machine cheap but i can not find any name plate on it, just the letters " B ST " can any one reconize it. ?
and further more i can not find any tool holders that will fit becurse af the 2 flat sides on it ?


http://i64.tinypic.com/27yzsed.jpg


http://i65.tinypic.com/10fatc9.jpg

Best regards Beovoxo

[ianagos]

Well bst could maybe mean brown and sharp taper but the drive keys are new to me.isthere a drawbar? Also does that adaptor come off the spindle nose. It looks like that may be some sort of quick change system but without being there I cannot say.

[havnerotte]

there is a 13mm drawbar for it .
here is a pic off the spindle nose. hope it helps

http://i65.tinypic.com/1zcpiti.jpg

[ianagos]

If I may ask what country are you in? Also it still seems like there is an adaptor on the nose?

[ianagos]

To me it seems like the collar on the spindle comes off maybe it is an adaptor but without me being there I can't tell I'm sorry

[havnerotte]

im located in denmark .. it is a part of the spindle "one pice" ...

[havnerotte]

Here is a new better pic of the nose.

http://i63.tinypic.com/1z4hl02.jpg

[ianagos]

Well I'm sorry to say I have not been able to find what it is. But it does not looke professional to me has the look of handmade. If you have a lathe I think you could make some of these holders?

[havnerotte]

i all thx for the help. its a steinel milling machine"west german" i think its based on a us mill

[havnerotte]

" the same cross table" Steinel Mill w/ Shaping Head